The worst PC problem ive ever encountered, Help plz

TheGeekFreek

Supreme [H]ardness
2FA
Joined
Mar 31, 2005
Messages
7,993
Ok,
I do in home PC repair, and 2 days ago I found myself a a ladys house because her RAID-1 failed and she needed a new drive.. Sounded simple.. Replace drive, Mirror working drive and be done.. I have now spent nearly 2 days straight trying to get this thing up and running.. this PC is 7 years old and MUST work based on the fact that the PC was a custom build for the business she works in and has a piece of proprietary software that would cost 1000$ alone to replace..

HARDWARE:
20gb+20gb RAID1 (Fasttrack raid card)
800mhz P3
128mb SD Ram (100)
CD Rom
3x PCI cards required for business to answer, route and record phone calls on 4 phone lines
Windows 2000 Pro


The PC is stuck in a cycle of endless reboots, no BSOD or error messages even with options in BIOS turned on to not reboot. There is no certain point that it reboots, its completely random. Sometimes ill reboot right when it starts to load windows, sometimes itll do it after 20 minutes.

1) Replace BOTH HDDs, Mirrored each individually for testing
2) Replaced RAM (Tested all 3 Slots)
3) Removed all PCI cards (aside from RAID)
4) Removed Drives from RAID array, removed card, tried running all 4 drives old and new on IDE alone
5) Repair installed Win2000
6) Replaced PSU

Only things left are CPU and motherboard, Even after 7 years of almost 95% uptime the thermal paste was still wet, Minimal dust (Couple bad areas). In the times I could get windows to run stable i would benchmark it, sometimes it would fail, sometimes it wouldnt. It may reboot 30 times, and then all the sudden itll work for 20-30 minutes.. Temps check in completely normal, drives have all been tested with spinrite.. Have looked over the entire board for leaking caps, and reseated CPU and BIOS chip..

What else could it possibly be??!!
This thing has been running perfectly fine for years, what would cause this sudden onslaught of problems?? My only guess is a failing L2 cache, but that doesnt explain the whole failure.. There is something ive totally missed..

Ive been pulling my hair out for hours trying to get this thing fixed.. this is her work PC and NEEDS to be up and running ASAP
 
I would still suspect the capacitors even if none of them appear to be bulging/oozing. They all die over time, and it would explain the seemingly random problems you're having.
 
see any bulging/cracked/too slanted (I'm talking like 30degs to the motherboard slanted) caps? that would be my first guess on a 7 year old system. What kind of PSU did you use?

boot into memtest 86, test that ram.

spinright might be something worth purchasing, never used it myself but have only heard good things about it. From what I've heard about it from Steve Gibson, creator, you'd be suprised how badly a hard drive will kill itself given the opportunity.
 
Does the system only re-boot while/after Windows loads? Does it ever die in the BIOS or while booting prior to loading the OS? That would guarantee you've got a hardware issue.

Have you tried taking everything out (including the RAID card) and doing a clean install of Windows on a spare hard disk? If that worked fine it would show that the problem is corruption on the original disks rather than a hardware problem.

I would pull the motherboard out of the case and run the system on a non-conductive surface. That would rule out anything being short-circuited.
 
Still no sign of leaking,busted, bulging, bent, or missing caps.. all look normal.. Even proped it up and hit it with my VM just to see if they still worked, and all checked out good..

and one of the drive I mirrored I did a clean install of 2000 with, forgot to put that on the list.. But yeah..
 
Still no sign of leaking,busted, bulging, bent, or missing caps.. all look normal.. Even proped it up and hit it with my VM just to see if they still worked, and all checked out good..

and one of the drive I mirrored I did a clean install of 2000 with, forgot to put that on the list.. But yeah..

I'm still more inclined to suspect something on the mobo (memory controller/northbridge/whatever) rather than the processor. You need to try the processor in another Socket 370 board and see if you can get it to run stable.

Hopefully a different motherboard + Windows 2000 repair install will give you a working system. If not, tell her it's a fire hazard or something and she needs a new computer. :)
 
yeah, I dont know where in the hell im gonna find another s370 board..

And its strange.. last night, I moved the RAM into slot 2, and it ran stable all night.. So i decided to check one last time if it was the raid controller and installed it and setup RAID again and it did the whole rebooting thing.. and now I cant get it to run AGAIN.. and It wont even complete a repair install..

This is making me crazy
 
Welcome to the art of PC repair... you have a master piece... sucks for you! :D

I always seem to get a buggy PC like this to fix...and it always makes me look bad to the customer like I don't know what I am actually doing with their PC. ...Aggravating!

Haven't got a crappy RAID setup to repair yet... phew!
 
yeah, I dont know where in the hell im gonna find another s370 board..

You can find some on Ebay. I'd send you one if I could find mine, but they all have bad caps. :rolleyes:

There has to be a way you could put together a new system for her that does whatever she needs to do. What proprietary software does she need that costs so much?
 
yeah, so I just dug deep into the bowels of my closet and found an old PIII CPU and mobo.. doing a repair install right now.. if this works im gonna swap the processors.. the my CPU doesnt work in her computer than it has to be the mobo.. there would just be nothing left it could be.. being that a lot of the symptoms pointed towards a memory error, I would almost put money on it being a northbridge problem..

but yeah, your right.. the amount of time this is taking me makes me look REALLY bad and ive been working on it almost non stop since thursday afternoon.. this thing has ruined my entire weekend.. If I gave her the bill that has totaled up right now, it would be about 2200$ since I charge 50$/Hr + Services and new Hardware, god, that would be a nice little paycheck.. right before she stabs my ass to death lol
 
I have some 370 boards...just gotta run a quick test on 'em...]Also getting ready to pull a Slot 1 VC-820 intel board out of service with a 1 gig processor and 512 megs of PC 600 RDram .......been running rock stable for 4 years on W2K. I even have the original driver disk and I/O shield.. and I have a stack of PIII socket 370 processors......let me know what ya need....

Also have a Abit VP6 with onboard raid..... and a matched pair of 1 gig PIII's
Let me know if you need any goodies..........

Just booted an Asus P3V 4X slot 1 with an 800 PIII works like a champ.....

and I have had a squirelly optical drive cause exactly the symptoms you are describing.....bout six months ago......beat me up for a week......tried a different one and all was well

One other question "3x PCI cards required for business to answer, route and record phone calls on 4 phone lines" what are these cards?????.......I have had a modem after a lightening strike cause this behavior more times than I can remember..............
 
I just want to throw my two cents in, that maybe its time for her business to upgrade. Even though you mentioned some proprietary software holding a new system back maybe its time to ditch that ancient software for something new?

Seems like the logical and more cost effective method than trying to constantly find parts for an ancient system, especially since it's going to keep having parts fail.
 
Update..
To answer the question of the proprietary cards..
1) Standard PCI Moden 56k
2) Standard Ethernet Card
3) Dialogic D/4PCI (Handles 4 incomming phone lines, acts as answering system and records conversations, then converts audio to .WAV so it can be transcribed by the lady)



Ok.. So the board I pulled out seems to have an issue, it will recognise everything fine, but had MAJOR issues doing a repair install of Win2000.. Had 2 CDs and had to swap them about every 30 seconds because it couldnt read files, discs look brand new).. Anyways.. It got installed, but still will not boot on that PC.. as soon as it starts to read the drive I just get a blinking cursor, no error.. Assumed jumpers were in wrong place but its on master where it should be..

I got that little lightbulb above my head and wandered into my closet and started digging around and found another PIII CPU (866/133).. with about 60 bent pins... After about an hour of careful tedious work i managed to straighten out all the pins.. I have just now popped it into the PC and it seems to be working fine.. booted correctly on first install.. Running a mem test right now and it seems to be working..

**EdiT: Memtest ran 60 passes without fail and 0 errors reported, Torture testing it with Prime 95 right now.. Been running for about 5 minutes...

*Crosses fingers*

If this works.. im getting wasted and playing Guitar Hero..
 
Weird. I've never seen a CPU fail. Good to see that it looks like you got it working.

Don't deliver the machine while wasted. ;)
 
Weird. I've never seen a CPU fail. Good to see that it looks like you got it working.

Don't deliver the machine while wasted. ;)


I have a stack of 'em on my desk now......:D you are very lucky....and I'm cracking a Shiner Bock to help you celebrate.........:D:Dlike I need an excuse...........
 
Yeah, ive got a ton of dead CPUs from OC'ing, or people frying them with covering them with paste like a birthday cake, and just many other various reasons.. but the is the first CPU ive ever seen that had a legitimate death.. Lil'Trooper...

But yeah.. Prime95 is still torturing the system.. no fails yet.. and im 12 shots deep into my Vodka+Vault.. Im feelin pretty good right about now..
 
Evil Juggalo said:
Yeah, ive got a ton of dead CPUs from OC'ing, or people frying them with covering them with paste like a birthday cake, and just many other various reasons.. but the is the first CPU ive ever seen that had a legitimate death..

Yea, same here. Glad to see its over though.
 
Getting wasted and playing guitar hero 3... the true H dream.

Charge her a good couple hundred bux :\
 
one confusion here: if you got it booted, get the applicationa and associated data off it.. then why pursue maintaining that? if the app and data are saved off, then they MUST get a new box...

I don't understand why you or they would seem to have to have that specific box if the app and data are saved now?
 
Back
Top