Testing system outside of case

Hito Bahadur

[H]ard|DCer of the Month - December 2006
Joined
Jul 8, 2004
Messages
3,169
Guys,

I want to do some testing on my system before I move it into a case. Is there a trick to getting it running with the power button of the case? When I set it up, it doesn't automatically boot up.

Motherboard is an NF7-M

Thanks in advance.
 
it should work fine. I normally use a screwdriver to short the power button pins to power on the system.
 
BigBadBiologist said:
it should work fine. I normally use a screwdriver to short the power button pins to power on the system.

Got it. I figured it was just those 2 pins I needed to short but wanted to be sure. Non of the other case connections need to be connected right?


 
if your mobo doesn't have a speaker, it's always good to have the speaker plugged in. But you don't need your LEDs or Reset switch.
 
Got it. For some reason I had to switch out Power supplies (it was a brand new Antec Truepower 380), but the screwdriver worked.
 
Back
Top