Testing a mobo before putting it into a case?

soulesschild

Supreme [H]ardness
Joined
Feb 18, 2007
Messages
6,176
Is there a safe way for me to test a mobo before putting it into a case? Like running it on top of a cardbox box or something to prevent static electricity etc? Reason being is I think my SG05's Zotac 9300 mobo crapped out (machine boots but no video from on board or discrete GPU) and I've ordered a new one to see if it will fix the issue but with how much of a PITA it is to get everything crammed into the SG05, I'd rather make sure everything is working before going through the effort of getting everything into the box.
 
yes. Put the box the mobo came in on something sturdy. Place the static bag on top of that box. Place the mobo on top of it.

a wood table would be best.
 
I would advise against using A/S bags, as some types (the silvery ones) conduct elecricity. The pink ones should be ok I think, but if you look on teh interwebs, you will find pictures of people who have A/S bags melted to their mobo. I think I would rather risk a little static myself.

You would be better off with unpainted/printed cardboard. The best thing is if you save the a/s foam packing that sometimes comes with mobos. Usually it's the perfect size, and offers a little padding on the bottom as well. I think the grey, and pink variants are A/S, but someone will correct me if I am wrong.
 
no bags the bag is only anti static inside

put mb on box if you have a mb w/ switches on board awesome i hate you :mad: because i have yet to own one of those but no worries tap power switch header with a flat screw driver (short pins for a sec) enjoy teh booting (hopefully)
 
Back
Top