temperature increase after updating bios?

Morrisvald

n00b
Joined
Oct 8, 2009
Messages
62
Hi!

I just flashed the BIOS from the stock revision to the latest revision "1702", and notice that the CPU temperature has increased a bit. It used to idle at 43C, but is now up to 51C.

I also ran the 3dmark vantage , after the stress-test , the highest reading of the cpu temperature was 71C isnt that a bit much for an core i7 860? pc probe is starting the alarm after 60C. Is it possible that the new bios increased the temperature?

I loaded everything in optimized defaults, and changed the fan profile to standard, (the same setting I had before the bios flash). I not 100% sure about the configuration because someone else build the computer. Is there something I have to adjust in the settings of the bios? Or could I just runt with the optimized default settings?


my computer spec:

Chassi: 1 x NZXT Crafted Series Apollo, Mid Tower, 5x5.25" / 1x3.5" Ext / 4x3.5" Int, 3x120mm (2 inkl.), 2USB / FireWire

Zalman ZM750 HP Power Supply 750W

ASUS P7P55D PRO, Intel P55 Express, 4DDR3 / 2PCI / 2PCIe x1 / 3PCIe x16 / 7SATA / 1IDE / 1eSATA, FireWire / 8USB / GBLAN / HD-Audio, ATX, LGA1156

Intel CPU Intel Quad Core i7 860 (2.8GHz) Socket-1156 1333MHz 8MB Cache 64bit 95W Lynnfield B1 Boxed

DDR3: 1 x Corsair XMS3 DDR3 1600MHz 4GB CL8

Seagate Barracuda 7200.12 1TB
 
thats a bit high when not overclocking however your ambient temps and case flow/wire management can make the world of a difference. im runnin in the high 70's but thats oc'd to 3.75 with HT enabled. what cpu cooler are you using?? stock?
 
yeah I am running the stock cooler... The case got 3 big fans , and the airflow should not be a problem.
Do you think I should go for a better cooler? I thought it would be enought with the stock cooler, (I am not oc-ing)
 
yeah the stock cooler is fine if you dont ever plan to overclock.. its possible they may have changed the default voltage for that processor in the bios so your temps look higher or if your going off the cpu temp within the bios then they may have changed the cpu temp offset..

and no 71C is not to much for that processor and delete pc probe its useless.. but i would check what your cpu voltage is.. my best guess is that they probably increased it..
 
Really thank you for your answer , I am having a hard time figuring this one out.

I am not sure what intel means by t-case , but mine temps are almost as high as the
tcase?
http://ark.intel.com/Product.aspx?spec=SLBJJ
TCASE 72.7°C

I have adjusted everything in auto -mode maybe I should try to manually adjuset the temp settnings in bios?

voltage readings in exact order from bios

V core is around 0.86 V in auto-mode
the other power settnings looks like this

3.41 V

5.21 V

12.15 V
 
dont worry about the Tcase.. the TjMax for the processor is 100C so at 100C the processor will downclock and then at 105-110 it will completely shut down to protect its self from overheating..

so .86v would be the speedstep voltage meaning its running at 800mhz in the bios.. probably have to put the processor under full load and watch the voltage in cpu-z..
 
Thank you again,

I have compared all settnings from my old bios configuration,
every settning is almost identical. The dram timings differ by some numbers
otherwise everything is identical from the bios...

maybe I should try downgrading the bios , but I am not sure how to do that with
asus p7p55d pro.

Its the rpm that bothers me , before the flash the computer was completely silent, now
I hear the fan adjusting up and down all the time...
 
i would agree that most likely the bios update increased your vcore or some similar voltage (even though it has always been set on auto). you can lower your temps by setting your voltages manually and stress testing. keep lowering them until its no longer stable and then bump up a few notches. as for the fan issues i am not certain, be sure to check all of your bios settings and motherboard software as they typically control fan rpm's
 
Back
Top