Team Xtreem UTT BH5 help

are you sure you're not past the cpu's limit?

also, two things:
1. that a64tweaker shot is messed up. take it again :p
2. high vdimm + low vcore = dead cpu. don't go too much higher on the ram without bumping up the cpu's voltage
 
The vdimm voltage limit on this board is 3.2v. I am actualy running the cpu at 1.45v but for some reason it doesnt show up as such in cpu-z. Oh and btw how is the a64 tweaker screenshot messed up? oh and how low should i put the vdimm so i dont fry my cpu?
thanks
EDIT: I also ran memtest last night for about 10 hours, just going through the tests. It got a total of 30 errors, i also set the ram divider down to 100mhz, just to make sure the ram that the prioblem isnt cpu related. Now just running prime 95 small fft's test, The opty is at 2.6 and teh ram is at 144mhz...
 
alrighty prime95 has been running small fft's for a while now, no errors or anything. thats with the ram at 100mhz :p . So the 2.6 isnt the cpu's limit, the ram must be...
 
those are some weirdass timings :p

lower trc to 7
trfc to ~15

twtr to 2
trtw to 2

tref of 3120 seems to be best for winbond style chips.


you have options for drive strength in your bios, right?
 
Back
Top