Tape Drive Not Showing Up

p0lish

Gawd
2FA
Joined
Sep 11, 2002
Messages
645
I recently hooked up an unused DLT tape drive in our Dell 2650 server. The SCSI card is a TekRam. The scsi cable posts in bios, and shows the tape drive, however when im in windows, i cannot find it in device manager nor can i see it in Symanntec Exec Backup. If i put a tape in, it spins and loads it(it seems) however, windows sees nothing. (windows server 2003 R2)

Any ideas?

Thanks,

p0lish
 
while it definitely should be atleast showing up as an unknown device... have you tried going through the Device Configuration Wizard in BE?

edit: and the SCSI card is showing up in Device Manager, correct?
 
yep, scsi card shows up in Device Manager(actually 2 instances). Device configuration wizard returns no available hardware.
 
Is this the only scsi device on that chain? What kind of scsi is it (U160, U320, etc?) Do you have a terminator on the other connector on the drive?
 
Is this the only scsi device on that chain? What kind of scsi is it (U160, U320, etc?) Do you have a terminator on the other connector on the drive?

that would be my next guess...
make sure the SCSI ID of the tape drive and SCSI controllers are unique, and make sure the chain is terminated either by a terminator or the jumpers on the tape drive (or last device on the chain) are enabled for termination.
 
It's the only device on the chain(single cable), and there is a terminator on the back of the tape drive.
 
Back
Top