System wont boot with printer hooked up

Foz2001

[H]ard|Gawd
Joined
Aug 25, 2001
Messages
2,029
I have a customers computer and it wont boot when his printer is plugged into it via usb. I tried the printer on my PC and mine is fine. His locks up before it even scans the memory.

Any ideas? I made sure the system was not trying to boot from usb or anything like that.


Foz
 
I had the same problem with an old AMD 939 build. Had to disable the legacy USB support. The printer was an old on that apparently just got USB and still used some old Serial protocols or something. Might be time for a new printer...
 
THe printer is fairly new, its a quite the unit too.

Anyways he is saying the only options relating to usb in the bios are the following:

- onchip usb controller [all enabled]
- usb 2.0 support [enabled]
- usb legacy kb support [disabled]
- usb legacy ms support [disabled]

what do you think?
 
I had a client with the same issue.
Newer usb printer on an older compaq win xp machine. in the end, we just decided to leave the printer unplugged until they needed it.
 
USB are plug and play, so you don't need to boot the system with it plugged in. Why troubleshoot a non-issue? Just unplug it for boot, and plug it back in when you need it(probably rather infrequently).
 
works fine if you plug it in after boot. And its not a big issue, but still its kinda stupid that you have to unhook a printer everytime you want to boot the system. So I think its an issue rather than a 'non-issue'
 
Back
Top