System & overclocking critique please!

Kaltec

n00b
Joined
Jan 29, 2007
Messages
25
Here is a new computer rig my cousin and I put together to be a gaming machine. The reason for the slower CPU and all the cooling on both the case and the extra CPU fan+heatsink is because we plan to overclock it to 4.0GHz. I'll probably add another 2GB of RAM later on, as well as another 8800GTX to make use of the SLI ability this system will have, as well as a physX card when more games are available for that hardware. Let me know what you guys think about it (especially the overclocking potential)and if you think there is anything I could add or replace to make it better! :D

 
... The reason for the slower CPU ...
CPU: Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor - Retail $316.00 USD
Your definition of "slower" is alot different than alot of other people's, lol. Here's some math for you:
4.0Ghz/9 = 444Mhz FSB... those 2GBNQ sticks max out at around 450Mhz, so you may or may not reach your 4Ghz goal. Though, they're priced so attractively, lol. If you can afford it, go for the Buffalo Firestix DDR2-800 or Patriot XP DDR2-800 LLK sticks (both use micron ic's; therefore can oc better).

FYI, you wont need SLI for 1680 x 1050 gaming. The single GTX will be just fine. When you notice it slow down, pickup the best card at that point in time and sell your GTX. Finding another GTX will most likely cost around the same price (or not much less) when that time comes, despite the age of the card. SLI as an upgrade path isn't a good idea. SLI is for high resolution gaming, think 24" or larger LCD.
 
Solid advice, thanks. Another question is if you think my PSU and mobo will be suffcient for the OCing I want to do. This will be my first time OCing a system so I'd like to get it right on paper before I actually do it.
 
I think someone else can suggest better power supplies for you in that price range. I'd suggest the Corsair HX620 620W PSU. It can supply 50A on the +12V rails. Your board choice is one of the best available. However, be ready to RMA it, since its basically luck of the draw when it comes to getting a bad board.
 
Thanks again, I think I'll make a post in the power supply thread asking for advice on one there.
 
Back
Top