System instability and slower than normal CPU

Joined
Mar 13, 2007
Messages
11
Hello,
I recently built a new computer to replace the one I have had for almost 5 years.
My old computer is the only other computer I have built so I am still a bit new to this.
Anyways, a couple nights ago my computer was, for one reason or another, giving me errors upon booting and failing to succeed in doing so. I don't actually remember the errors but after turning off the PSU and turning it back on, I did not have that problem anymore.
I am, however, having a problem with my computer freezing or rebooting periodically.
I also have noticed that my C2D E6700 is supposedly running at 2.1ish Ghz instead of 2.67 as it is supposed to.
I am running it on a EVGA nForce 680i SLI.
I built it on the 24th of last month and it has been working awesomely until the 6th.

Any help on resolving these issues would be much appreciated.
 
What I found really helps is a check list. Make a list of everything you possibly thing is wrong. For example, PSU failure, latest bios, memory errors, etc. Those are the first things that come to mind. Get a PSU tester and see if it is good (this most of the time is the problem). Second, update the bios (never bad to do). Test your memory if everything else is a go. I only listed the things that I can temporarily think off. There are many more. But those again are the top 3 most common issues.
 
Sounds like the BIOS has used it's ability to recover from a bad overclock and overcompensated, check your FSB settings and see if it's at 266 MHZ
 
Also try resetting your bios to all the defaults and seeing if you still have the issue. Not sure if you are running XP or Vista (2k or 98.. whatever) but by default it's set on reboot on stop error (BSOD) so check your event log (right click my computer > manage > event viewer > system) and look for some failures.

You might see that the last time you installed windows update it installed a new driver for something and you may not have realized it and thats causing the issue, so rolling back drivers could fix the issue. You can then research why the new driver didn't work correctly while your system is up.

Might want to run speedfan as well and monitor your system temperature, it could be getting hot and shutting down.
 
Thanks for the responses.
You guys also reminded me that when it first started giving me trouble, I updated the mobo driver and then tried to update the BIOS driver but for some reason can't get it to work.
I tell it to boot from the floppy and then it shows some screen and asks me to do Y or N but I get "unrecognized command or filename" when I give it either response.
I have not actually made any attempts to overclock and CPU-Z tells me my FSB is running 266MHz.
I am running Windows XP and I checked the event viewer and there are a bunch of "Error"s that go as far back as lastnight.
I checked my windows update history and it installed everything on the 24th except for a windows security update last 3rd.
I ran speedfan and everything is running between 31-46C except "System" which it claims is running at -65C.
 
Is it still running at 2.1Ghz? This could be due to the motherboard lowering the CPU's core frequency, by lowering the multiplier, when the system is idle.
 
I think so, but to be honest I am not even sure.
CPU-Z v 1.39 says it is running at 1.6GHz with a multiplier of x6, bus speed of 266MHz, and a rated FSB of about 1066MHz
CPU-Z v 1.38 however, says it is running at about 2.1GHz with a multiplier of x8, bus speed and FSB the same.
I am not sure which to believe, I would think the newer version would be more accurate but if i remember correct, its been saying 2.1GHz on that BIOS screen that pops up right when the comp starts booting.
 
I did a little test and ran CPU-Z v1.39 and it runs at 1.6GHz with a 6x multiplier while idle, but then I ran BF2 and it went up to 2.1GHz with a 8.x multiplier for a few minutes before crashing.
 
Alright, my computer just crashed again, it took several attempts to get it to boot, and I even got a Blue Screen Of Death. I would really appreciate any help you guys could lend me...
 
Alright, my computer just crashed again, it took several attempts to get it to boot, and I even got a Blue Screen Of Death. I would really appreciate any help you guys could lend me...

There should be a few settings you can disable in the BIOS to prevent it from reducing the CPU's frequency when idle, which might solve some of your problems. I don't know that they're all called with your particular motherboard, so you'll probably have to do a search for overclocking tips specific to your motherboard.

Edit: Take a look here.

Use the following settings in the BIOS (as per the guide):
CPU Thermal control - disabled
C1E Enhanced holt state - disabled
Intel Speedstep - disabled

CPU Spread Spectrum - disabled
HT Spread Spectrum - disabled
PCIe Spread Spectrum SPP - disabled
PCIe Spread Spectrum MCP - disabled
Sata Spread Spectrum - disabled

Although you're not overclock, it'd be interesting to see if this will ensure that you CPU runs at it's rated frequency.
 
Alright, last night I was able to update my BIOS driver.
After that, my CPU was idling with a multiplier of 8x, but when I would start to put it to work, it would jump up to 10x where it should be.
I changed those settings, and now it just stays at 8x all the time :(

I am also starting to think the crashes are a result of a dieing hard drive.
Does this sound like it could possibly be the cause of my problem?
 
Well it is not the Hard Drive.
I just bought a new one and it blue screened while trying to instal windows...
Next I guess imma try a PSU tester...
 
Ya I tried that, got 45% through my first pass and it freaked out on me and started listing off errors by the thousands.
However, since then, my computer now won't even go into BIOS.
When I turn it on, the mobo starts making long beeps, nothing shows up on my monitor, and the little LED hex readout on my mobo says "C1" which when referenced in my manual says, "Code: C1, Name: Memory Presence, Description: Base memory detect"
I was starting to think it was the RAM for a while but this whole thing with it not even going into BIOS is making me think it might be the mobo.
Hopefully I can take it down to Fry's and get it exchanged for a new one...
 
Hello,
Anyways, a couple nights ago my computer was, for one reason or another, giving me errors upon booting and failing to succeed in doing so.

I am running Windows XP and I checked the event viewer and there are a bunch of "Error"s that go as far back as lastnight.

Alright, my computer just crashed again, it took several attempts to get it to boot, and I even got a Blue Screen Of Death.

Well it is not the Hard Drive.
I just bought a new one and it blue screened while trying to instal windows...
Next I guess imma try a PSU tester...

My first question throughout this entire thread was: what was the error? or what were the errors? more specifically, what was the error code for the BSOD?

However, since it crashed during install, this most likely means its either a problem with the HDD, HDD cable, Optical drive, Optical drive cable, storage controller, or the RAM...

Ya I tried that, got 45% through my first pass and it freaked out on me and started listing off errors by the thousands.

...and since you have errors evident in memtest, along with the fact that you got this from fry's, leads me to believe you've got an older revision of that board that kills ram. I'd RMA it to eVGA instead of trusting another board from Fry's... but who knows, maybe they have some new revisions sitting around. So, replace your board AND your RAM.
 
...and since you have errors evident in memtest, along with the fact that you got this from fry's, leads me to believe you've got an older revision of that board that kills ram. I'd RMA it to eVGA instead of trusting another board from Fry's... but who knows, maybe they have some new revisions sitting around. So, replace your board AND your RAM.

Yeah, it sounds to me like your board has been slowly killed your RAM. Usually, when people get a defective board, they find that they have to reduce their overclock more and more until they can only actually run their RAM lower than its rated frequency. I'd RMA your board, get a new one, and hope your RAM still works.
 
oh, yah... run memtest on your ram with the replacement board before replacing it, hehe.
 
I got my new mobo from EVGA today.
I installed it and went to test it and it gave me the same prolonged beep and "C1" that the old mobo was giving me.
Took my RAM back to fry's and got it exchanged.
Now it all runs fine :)
Between having someone do a hit and run on my car and having my brand new $1500 crap out on me near the end of my second term in college, last couple weeks have been pretty damns stressful for me :(
It's all good now and I just want to thank all of you for your help :)
Especially enginurd for suggesting that I RMA my board to EVGA.
If I had taken it back to fry's they might have given me another AR but EVGA sent me a brand new A1 :)
 
I got my new mobo from EVGA today.
I installed it and went to test it and it gave me the same prolonged beep and "C1" that the old mobo was giving me.
Took my RAM back to fry's and got it exchanged.
Now it all runs fine :)
Between having someone do a hit and run on my car and having my brand new $1500 crap out on me near the end of my second term in college, last couple weeks have been pretty damns stressful for me :(
It's all good now and I just want to thank all of you for your help :)
Especially enginurd for suggesting that I RMA my board to EVGA.
If I had taken it back to fry's they might have given me another AR but EVGA sent me a brand new A1 :)

I'm glad to hear it's all working now, then!
Let's just hope it stays that way, huh?
 
Back
Top