imapcmodder
n00b
- Joined
- Apr 12, 2006
- Messages
- 61
Ok here's the deal:
AMD X2 3800+
4GB Rosewill DDR 400 3-4-4-8 2T
eVGA NF41-SLI Mobo
eVGA 7900GTX EGS
Sonata II case w/450W Smartpower PSU
74GB Raptor (boot drive)
2x300GB Maxtor SATA drives (1.5, 16MB Cache)
60GB Hitachi 120GXP
160GB WD External HD
Pioneer DVD/RW
XP Pro SP2 - fully updated
Those are my specs at a glance, here's the problem. I just built the system about a month ago, been running great and stable. In the last couple of days the system now hangs any where from a few minutes to a few hours after a reboot. The system hangs so hard that I have to hit the reset button to reboot. I'm currently running Prime95x2 while I'm at work to see if it craps out or not by the time I get home.
I did have the system OCed for a while, the CPU from 2000 -> 2400 and the GPU from 650/1600 -> 690/1700. I ran 3dMark05/06 and both completed while OCed with flying colors.
I realize the two weak points in my system currently are:
The RAM, which is great at stock speeds but doesn't like to be OCed(in fact I chose 240x10 so that I could set the RAM at DDR400 speeds, but for some reason the RAM rolled back to DDR333 speeds at this OC).
The PSU which is sitting with 15A/18A on V1/V2 12V rails. This is soon to be remedied as my Fortron FSP 700W arrives tomorrow. I bought this because I'll be going SLI as soon as my eVGA stepup happens for my 7800GT.
I guess I just want advice/suggestions/insults about OCing with less than ideal parts...whatever it takes to keep this system stable.
And yes, all virus/spyware definitions are up to date and cleaned out, and this Windows install was brand new just a month ago.
So let me hear what the masses have to say.
Thanks!
Edit: Also wanted to state that the GPU hovers around 50 at idle and CPU is around 40 (this is with the AMD HSF).
AMD X2 3800+
4GB Rosewill DDR 400 3-4-4-8 2T
eVGA NF41-SLI Mobo
eVGA 7900GTX EGS
Sonata II case w/450W Smartpower PSU
74GB Raptor (boot drive)
2x300GB Maxtor SATA drives (1.5, 16MB Cache)
60GB Hitachi 120GXP
160GB WD External HD
Pioneer DVD/RW
XP Pro SP2 - fully updated
Those are my specs at a glance, here's the problem. I just built the system about a month ago, been running great and stable. In the last couple of days the system now hangs any where from a few minutes to a few hours after a reboot. The system hangs so hard that I have to hit the reset button to reboot. I'm currently running Prime95x2 while I'm at work to see if it craps out or not by the time I get home.
I did have the system OCed for a while, the CPU from 2000 -> 2400 and the GPU from 650/1600 -> 690/1700. I ran 3dMark05/06 and both completed while OCed with flying colors.
I realize the two weak points in my system currently are:
The RAM, which is great at stock speeds but doesn't like to be OCed(in fact I chose 240x10 so that I could set the RAM at DDR400 speeds, but for some reason the RAM rolled back to DDR333 speeds at this OC).
The PSU which is sitting with 15A/18A on V1/V2 12V rails. This is soon to be remedied as my Fortron FSP 700W arrives tomorrow. I bought this because I'll be going SLI as soon as my eVGA stepup happens for my 7800GT.
I guess I just want advice/suggestions/insults about OCing with less than ideal parts...whatever it takes to keep this system stable.
And yes, all virus/spyware definitions are up to date and cleaned out, and this Windows install was brand new just a month ago.
So let me hear what the masses have to say.
Thanks!
Edit: Also wanted to state that the GPU hovers around 50 at idle and CPU is around 40 (this is with the AMD HSF).