System doesn't boot with new video card

GTCOBRA1

Limp Gawd
Joined
Jun 5, 2004
Messages
142
I built a HTPC using a motherboard with an onboard 6150 Nvidia video chip. The system was 110% stable. Since the motherboard also had a pci-e slot for a video card, I just upgraded to the new Nvidia 7300GS video card. Nvidia video drivers generally being universal for all new cards, I figured windows would find the new card and configure itself using the driver that was there already for the 6150 video chip. No such luck. The found new hardware process went and did it's thing, and ended by saying could not install because no driver for this device found. I'm thinking huh??? OK, so I go to add/delete programs, and delete the video card driver. I then use NV Clean to make sure all traces of the driver are gone. I run the disk that came with the card, install the driver, and all is well........so I think! The PC runs fine all day, and I shut down. When I go to start up later, the PC will not boot! I get as far as the Windows screen with the scrolling bar, and the scrolling bar just stops, and bootup will go no further. I believe the point it stops at is where it should initialize the video card? The only way to get it to boot is to boot in safe mode, delete the video card driver, then reboot, at which time it boots fine and gives me the found new hardware message. I reinstall the video card driver and the PC works great, untill I shut down. Then it will not boot again, untill I go through the whole processes again of safe mode, delete video driver, boot up, reinstall video driver. What's causeing this???? Pleases help!
 
Try what you've been doing, but toss the CD. Download the latest drivers from Nvidia.com and give them a shot.
 
The latest "official" drivers from Nvidia don't recognize the new 7300GS and will not install. I downloaded the latest beta driver off the Nvidia site which does support the 7300GS, and it works great, but doesn't solve the booting problem.
 
what about in the bios is there a option to disable the onboard video? or a jumper ..what mobo are you using?
 
Back
Top