Switched to 1055t 95w - Awesome Processor

QuiteSufficient

Sufficiently [H]ard
Joined
Mar 2, 2001
Messages
5,152
I switched up my home machine from a C3 955 to a 95w 1055t. Amazing processor.

1055t.jpg


Just started overclocking. I have C1e, other C states, and Cool'N'Quiet enabled so far.

The idle stock v core on this chip is 1.09 and the load is 1.17. Temperatures are awesome considering I did not put any thermal paste on the chip and just recycled the amount that was on the underside of the H70.

Now I understand why everyone wants one of these 95w deals! I'll keep everyone posted on how far I get, but given what you can sell a 955/965 for used, these are an awesome deal on ebay.
 
very nice! love to see how far you get in OCing.
 
I was looking at getting one. I can't find one on eBay but I did see someone selling a 1065t. I'm thinking about putting my MacBook Pro, Athlon x2 5000+ and x3 740 BE on eBay (to take care of some things) and maybe look at getting one of these.
 
Just keep checking every week. I got mine from a guy in Canada for ~160 (he claims new).

The 1065s I have seen are in the $240 price range, not sure if that is worth it for .5 multiplier.

At 3500/2500NB linpack stable so far. 1.2 vcore. Still have all the C states, idles down to about 1000.

Going to try to see if I can get a 4000mhz low voltage oc that will idle down tonight.
 
Dang, that's a nice overclock. The best I can do at stock (1.3) voltage on my 1090T is 3.6 ghz.
 
With 1090t you can hit 4+ ghz pretty handily from what I can tell. mine does 4.2!
 
Up to 3640/2600 NB. Still have all the scaling options enabled. Amazing how it takes 1.275 VCORE to do linpack, but only 1.2 to do prime.
 
Pretty disappointed, chip will not boot at 270mhz bus not matter what settings I use.

:(

Might be time to go on to the next one!
 
I guess not all chips are good OCers. Have you adjusted HT to stay close to 2000? I'm looking to take my 1055t and GB board higher also. I also at the same CPU/NB clocks.
 
Yeah I'm at ~1900.

I was excited with how well this 95w chip was progressing at such low voltage, then it just hit a wall. I am happy that it will still idle down to ~1,050mhz and transition with no problems, but other than that just not enough mhz.
 
Looks about the same as new C3 revision chips (late week 2010/early 2011). My week 49 955 does 3.6 with 1.28V as well. Nicer with 6 cores though!
 
Any ever tried underclocking to get temperature under control? I'm planning on building around Sugo SG02 case and plan to use an phenom II x6. Is it possible? I'm thinking of using the 1055t.
 
What was wrong with the C3 955? Was it not a BE? my BE c3 955 is doing 3.7Ghz at around 1.4v and I haven't even found the high limit yet. I just settled on 206x18 as that seems all my old freezer pro 64 wants to handle to keep Max load temps ~45*c
 
The 955 I used at home was one of the better ones Ive seen, 4.0 @ 1.4v

I just wanted to try something different for fun.
 
Hmmm, maybe it's your motherboard? I don't think you've hit the limits of that processor yet. Different motherboards can reach different maximum bus speed. I know some motherboards cap out at around 250-270 bus sped, but others can reach 330, especially the high-end ones. It is more motherboard dependent than CPU dependent. I feel like that 1055T has a lot more to give.
 
This particular machine has the Gigabyte GA-890FXA-UD7....

Now that I look around the web other 95w 1055s hit 4.0 with as little as 1.28vcore, so Im pretty convinced its the chip.
 
Any ever tried underclocking to get temperature under control? I'm planning on building around Sugo SG02 case and plan to use an phenom II x6. Is it possible? I'm thinking of using the 1055t.

These under-volt extremely well. I use PhenomMSRTweaker to control idle power usage and have my chip running at 1.6GHz with 0.975v with little to no load. Then it steps up to stock 3.2GHz running at 1.175v which lowers the heat output dramatically compared to the default voltage. A 1055T should have characteristics near the same as my 1090T.
 
Did some more testing, I think my memory is the weak link in this machine. I am using 2 sticks of 1600mhz ram, and 2 sticks of 1066mhz ram. If I set the ram to 1066, I am able to boot at 270mhz FSB, but any attempt to manually set timings results in a no boot. I think next I will pull the 2 1066 sticks and give it a whirl.
 
Yeah, AMD boards/CPUs are weak when it comes to running 4 sticks. They overclock much higher when using only 2 sticks.
 
Well, I quite embarassingly had 1 2gb stick matched up with a 1gb stick in each channel, swapped them back.

3780mhz @ 1.325vcore - will run 32 minutes of linpack. Still have all the C states/Cool'N'Quiet, idles down to 1080mhz
 
These under-volt extremely well. I use PhenomMSRTweaker to control idle power usage and have my chip running at 1.6GHz with 0.975v with little to no load. Then it steps up to stock 3.2GHz running at 1.175v which lowers the heat output dramatically compared to the default voltage. A 1055T should have characteristics near the same as my 1090T.
I finally built my setup and it's gone a whole lot better than I had expected. Sugo SG02. AMD Phenom II X6 1055t (125 Watt TDP). MSI 880GMA-E53. 16GB Crucial DDR3. 80GB Intel X25-M for operating system and Samsung 320G drive for data. Everything powered from Seasonic X400. Using the video from the motherboard. Still debating putting a video card in the box, but the 2 - 80mm fans installed at the top are pretty noisy even at 50%. Even so, I don't get temperatures anything over 68 degC.

Turned out I didn't have to underclock after all.
 
I undervolted and overclocked my processor. 1.277 volts under load (as measured by CPU-Z and ROG connect), 3.6 ghz on all 6 cores. I have to say, that is pretty impressive in of itself. 3.8 ghz requires a jump to 1.33 volts, so I decided it wasn't really worth the additional heat and power consumption.
 
Delayed update -

I ended up with an 8gb dual channel kit, and the bus at 270mhz - 3,780mhz. Takes 1.3v to be prime stable/15 minutes of linpack, not sure how much it would take for an hour of linpack.

Pretty happy at this for now.
 
Man where did you get yours from? I'd really like to get a 95w 1055t but no one seem to sell them here in the States. Can anyone tell me a good place to look for one?
 
Back
Top