Suggestions for my WC setup

[lollerskater69]

I plan on purchasing these items for a Wc setup for my i7. I really wanna push this chip, lmk if the rad is sufficient. I will be using three antec tricool fans that push about 96 cfm.

I'm going to be putting the 7/16 over the 1/2 barbs. Should give me a nice seal.

Item Options Unit Price Qty. In Stock Cost
HEATKILLER® Backplate 1366 [remove]

$7.70 Yes $7.70
Breeze Miniature Hose Clamp 7/32 in. to 5/8 in. [remove]

$0.39 Yes $3.12
HEATKILLER® CPU Rev3.0 1366 LT [remove]

* Choose your fittings : x2 DTek High Flow 1/4 BSPP to 1/2. ID Barb (+4.00)

$73.95 Yes $73.95
Swiftech MCR320-QP Quiet Power 3X120mm - Black [remove]

* Choose your fittings : x2 DTek High Flow 1/4 BSPP to 1/2. ID Barb (+4.00)

$51.95 Yes $51.95
Dtek dB-1 Compact 12v DC Pump w/Tach Sensor [remove]

* Choose Your Fittings : 1/2in. ID high flow (default)

$43.95 Yes $43.95
Durelene PVC tubing 7/16in. ID 5/8in. OD by Saint-Gobain [remove]

$0.45 Yes $4.50

Subtotal: $185.17
Shipping: $16.70
Tax: $0.00
Total: $201.87

 

[soulesschild]

Why not go with a D5 or DDC3.2?

Everything else looks good I guess. I wouldn't recommend going unclamped but that's your own problem.

 

[lollerskater69]

worm drives are in there. the d5 is too expensive, and i'm using the pump for one loop.

 

[soulesschild]

http://www.sidewindercomputers.com/swmc12vdcpuw.html

about 15 dollars more for future expandability.

 

[Snoozer]

http://www.sidewindercomputers.com/swmc12vdcpuw.html

about 15 dollars more for future expandability.

And for $7 more you get what you really want: http://www.sidewindercomputers.com/swmc12vdcpu.html

You don't need hose clamps when you put 7/16 tubing over 1/2 barbs.

 

[lollerskater69]

the pump is fine, thanks for the suggestions. If I was running gpu and cpu I would get the d5.