• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Suggest a shroud

W

Wazooty

Limp Gawd
Joined
Jun 21, 2009
Messages
379
At least I think they're called shrouds.

I'm looking to move my radiator outside my case, and I need one of the extensions to give it some space. Could I get some recommendations? The only one I've been able to find is the radbox...
 
I went to Lowes and bought some L shaped brackets. Eight 5 inch, and eight small 1 inch attached together with 5/16in machine screw and a locking washer. I cut the rest of the bolt off and then sanded it. I also had to cut the 5 inch bracket, so it wasn't sticking in too much. I used 1/2in machine screws and locking washers to keep the brackets on the side of the case. I spray painted the brackets with High Gloss spray paint. Unfortunately, the rads got a lil scratched on the sides, but its nothing that a little touch up can't fix.

For the molex connectors on the fans I cut an oval just a little bit bigger then the connector, into the side panel. I put some electrical tape around the edges because it was a little rough.

So, that's what I did for my two triple rad's. Here's some pics.

4052903752_29e3a460b4_o.png

4031278767_4620b4b01f.jpg
4031278501_1075e2e99d.jpg

4013390379_bb6f1dea81_m.jpg
4014156044_620929e90c_m.jpg


I need to take some better pics, these don't do it justice ;)
 
You must log in or register to reply here.
Back
Top