![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Original Thread
The Build:
DFI 925X-T2 Socket T (LGA 775) Intel 925X ATX Intel Motherboard
Intel Pentium 4 550 Prescott 800MHz FSB 1MB L2 Cache LGA 775 Processor
CORSAIR ValueSelect 1GB (2 x 512MB) 240-Pin DDR2 SDRAM Unbuffered DDR2 533 (PC2 4200) Dual Channel Kit System Memory
CREATIVE Sound Blaster Audigy2 ZS
Maxtor L01M200 Hard Drives 250GB Sata
Plextor DVD Burner PX-716SA/SW
BFG GeForce 6800 GT OC 256MB DDR3/PCI-E/TV-Out/DVI
Antec True550 EPS12V
ALPS Silver 1.44MB 3.5" Internal Floppy
LINKSYS WMP54G
Antec SUPER LANBOY case
The Problem
So the computer just made a trip across the state of washington. Once it was setup I checked to make sure all the cables were still connected. Computer powered on fine. Lights, floppy noises, hard drives, and CD burner. Got into XP fine, read some manga on the comp for five hours and left it and left the room for four more hours.
When I came back to the room the computer was off. Turned it on. Fans start spinning and case lights turn on. But the monitor never gets any signals. Four seconds later it powers off for four seconds and powers on again. Fans spin and the lights are on indefinitly but no other hardware or signals to monitor.
Rechecked all external and internal cables and they are all conected. Retried it this morning and same thing.
The temperature in the room was always comftorable and the case temp never got over 30C and the CPU never over 39C. No overclocking.
UPDATE
So I finally got the PSU RMA'ed (lack of time) and got it back. I removed the motherboard from the case and re-attched it. I only have a stick of ram connected to it besides the CPU/heatsink. Turn it on, it only spins for a second and turns off. Do I need something else connected or is there a problem somewhere?
The Build:
DFI 925X-T2 Socket T (LGA 775) Intel 925X ATX Intel Motherboard
Intel Pentium 4 550 Prescott 800MHz FSB 1MB L2 Cache LGA 775 Processor
CORSAIR ValueSelect 1GB (2 x 512MB) 240-Pin DDR2 SDRAM Unbuffered DDR2 533 (PC2 4200) Dual Channel Kit System Memory
CREATIVE Sound Blaster Audigy2 ZS
Maxtor L01M200 Hard Drives 250GB Sata
Plextor DVD Burner PX-716SA/SW
BFG GeForce 6800 GT OC 256MB DDR3/PCI-E/TV-Out/DVI
Antec True550 EPS12V
ALPS Silver 1.44MB 3.5" Internal Floppy
LINKSYS WMP54G
Antec SUPER LANBOY case
The Problem
So the computer just made a trip across the state of washington. Once it was setup I checked to make sure all the cables were still connected. Computer powered on fine. Lights, floppy noises, hard drives, and CD burner. Got into XP fine, read some manga on the comp for five hours and left it and left the room for four more hours.
When I came back to the room the computer was off. Turned it on. Fans start spinning and case lights turn on. But the monitor never gets any signals. Four seconds later it powers off for four seconds and powers on again. Fans spin and the lights are on indefinitly but no other hardware or signals to monitor.
Rechecked all external and internal cables and they are all conected. Retried it this morning and same thing.
The temperature in the room was always comftorable and the case temp never got over 30C and the CPU never over 39C. No overclocking.
UPDATE
So I finally got the PSU RMA'ed (lack of time) and got it back. I removed the motherboard from the case and re-attched it. I only have a stick of ram connected to it besides the CPU/heatsink. Turn it on, it only spins for a second and turns off. Do I need something else connected or is there a problem somewhere?
