Stuck in a Boot Loop

dalton

Weaksauce
Joined
Dec 7, 2004
Messages
110
I am currently in the process of upgrading my motherboard and processor. I was planning to just reinstall Vista, but I can not seem to recognize my DVD ROM drive. The drive is PATA and the HDD's are SATA. Not sure what the deal is, but I have double checked all of my connections and they all seem to be fine, yet when I boot up I am stuck in a loop. I check the boot menu and it never shows the ROM drive. Not sure what I need to do, but I've been in the BIOS and I can't see the drive. It was working before the mobo change and is actually powered and working right now only it won't read.

Motherboard - DFI Lanparty UT nf4 SLI-DR Expert
Processor: AMD X2 3600+
New FSP PS that was working fine before I changed anything
NEC 3500 DVD ROM Drive

Any help or suggestions on what I need to check or change?
 
First problem, DFI motherboard that gets no compatibility testing. No way to fix that now...

Have you set the BIOS to default settings and F10ed?

Unplug all the other drives.

Try a different cable?

Try swithing the master/slave jumper on the drive?

Try switching master/slave positioning on the cable?

Try a different DVD drive. I have run across many that were not compatible with motherboards that are not widely compatibility tested.
 
That might also explain it not liking a stick of working RAM too?

Thanks, I will try these suggestions. Maybe my ASUS in my other machine will work.
 
I may be missing something here but from your info it would appear the main problem is the MBoard not seeing your HDD?

Check which SATA port you are plugging into - some motherboards have two controllers and one can sometimes be disabled. I would say get your HDD recognised in BIOS before you try booting anything.
 
Back
Top