stuck at 400FSB sync, E6600 + commando

N

nickstje

n00b
Joined
May 6, 2006
Messages
18
Hello guys; I just got my computer and I'm experimenting a bit with overclocking, but I'm having problems getting +400FSB stable at my system...

as I mentioned in the title; I got a E6600, asus commando board and 2 gig 6400 Corsair mem ( running at 5/6/6 15Clocks 2T - to make sure my timings arent giving issues)

I'm running stable Orthos at 7x400, and getting 51 degrees stressed with it.

My voltages:

Vcore 1.40V
SB Vcore 1.10V
FSB termination voltage 1.46V
DDR2 @ 2.15V
DDR2 Term voltage 1.10V
NB Vcore 1.62V


Anything I am missing here? I know my memory is only DDR800 but it should go a bit beyond stock speeds; right?
 
I'm running at 7 x 400 :) I know I could probably go 8 x 400 too, but I wanted to make sure the amount of Ghz wasn't the limiting factor..
 
You must log in or register to reply here.
Back
Top