Storage suggestion for new PC build

Sir Aaron

n00b
Joined
Dec 23, 2016
Messages
4
I've been nursing along an old Core 2 Duo Wolfdale system that I assembled in late 2008. Eight years has been a pretty good run. I've replaced/upgraded every part except the MOBO and processor. I think it is time to move forward with building a new PC even though most of my "computing" has moved to ipads. For a while I've got to confess I thought about just buying a laptop but I just don't think that will work for me.

Anyways, I've got most of the parts specked out but storage is an issue that is driving me a little crazy. I should probably just make a decision and move on. I've found myself struggling with is what type and how much storage capacity.

Most of my internet surfing has been moved to ipads so the computer no longer sees much action. Mostly my family uses the computer for (a) storage of family photos and videos (b) video/photo/website/music editing, cutting, etc. (c) Excel and Word documents when an Ipad interface simply isn't expedient (d) when a large screen is beneficial (e) ripping movies to my NAS(s) (movies I legally purchased) and (f) any work where an ipad wouldn't suffice.

My new setup will have a nvme m2 slot on the motherboard. My current Sata 3 hard drive on my existing system is nearly full at 1TB and my video needs are increasing (since we take more video).

So my question is, what type of hard drives should I get and what sizes? 1 nvme m2 and 1 SSD? Or 1 nvme m2, 1 SSD, and one traditional? I was thinking originally of a 512 GB nvme and a 3TB Traditional drive. But now I'm wondering if I should go with some other combo.

Also, the type of nvme I'm not sure about. I could go with the Samsung 960 evo or pro or go with an Intel 600 series that is much cheaper but also not in the same league.
 
1 SSD and 1 or 2 traditional drives.

The SSD can be SATA, M2 NVME, or M2 SATA - doesn't really matter. The Samsungs are a good brand to stick with, though if you're cost conscious you can go with the Crucial MX300 line as well. They'll all be plenty quick, and I would value capacity over interface speed, since none of your use cases sound like they'll stress even a low end SSD.

The HDD is where the real decisions happen. It sounds like this is where the real 'important' stuff will live - family photos and videos, large media, etc. If your system board supports RAID and you care about the shit on your drives, I would recommend a RAID 1 mirror of your stuff. Two 3 or 4 TB drives in a RAID 1 mirror will give you some redundancy in case of a disk failure. It is *not* a substitute for a backup - you should get something like Backblaze or Mozy or some other form of backup for your important irreplacable files - family stuff I'm looking at you - but the RAID 1 will give you at least a layer of defense against failure without adding too much complexity to the system. Plus, physical disks are pretty cheap.
 
1 SSD and 1 or 2 traditional drives.

The SSD can be SATA, M2 NVME, or M2 SATA - doesn't really matter. The Samsungs are a good brand to stick with, though if you're cost conscious you can go with the Crucial MX300 line as well. They'll all be plenty quick, and I would value capacity over interface speed, since none of your use cases sound like they'll stress even a low end SSD.

The HDD is where the real decisions happen. It sounds like this is where the real 'important' stuff will live - family photos and videos, large media, etc. If your system board supports RAID and you care about the shit on your drives, I would recommend a RAID 1 mirror of your stuff. Two 3 or 4 TB drives in a RAID 1 mirror will give you some redundancy in case of a disk failure. It is *not* a substitute for a backup - you should get something like Backblaze or Mozy or some other form of backup for your important irreplacable files - family stuff I'm looking at you - but the RAID 1 will give you at least a layer of defense against failure without adding too much complexity to the system. Plus, physical disks are pretty cheap.

Thanks.

I use crashplan for generic backup and SmugMug for photos and videos. I'm going with a Z170 chipset which will support raid (I assume that means without an additional raid card). But honestly, I'm just not a huge fan of raid. Internet speeds are so good that downloading backups is pretty easy. if anything Id prefer a clone backup of the OS drive. Because reinstalling programs is a major pain (although to be honest sometimes better....kinda like a good housecleaning).

If I use an M2 slot that will free up a drive cage for future use. I'm sorta limited in my SFF case.
 
To each their own. The M2 slot is fine, most of them support either PCIe (NVME) or SATA access modes, and either should be fine. I've got two PCs, one boots from M2 the other from SATA SSD.

If you have the Z170 board, RAID 1 is supported for boot volumes as well (at least SATA ones) but most folks balk at the cost of two SSDs. But SSDs are less likely to fail than mechanical drives anyways (no moving parts), so that's probably unnecessary.
 
To each their own. The M2 slot is fine, most of them support either PCIe (NVME) or SATA access modes, and either should be fine. I've got two PCs, one boots from M2 the other from SATA SSD.

If you have the Z170 board, RAID 1 is supported for boot volumes as well (at least SATA ones) but most folks balk at the cost of two SSDs. But SSDs are less likely to fail than mechanical drives anyways (no moving parts), so that's probably unnecessary.


The SFF case limits some of my options as I have it configured. But mostly I was interested in answering the question as to what I should be putting on the SSD drive and how much room would be adequate to fulfill that task. I think I have that answer.
 
Well, good luck then! I would aim for the biggest SSD you can get! The MX300 M.2 (SATA) 525 GB drive is only $130 on Amazon and if you've got the bay the 2.5" version of the same drive is even cheaper at $113. If you've got a bit more budget, I'd go for the Samsung EVO line.
 
Back
Top