"Stop, Unknown Hard Error" at boot.

bigdavethehorn

Limp Gawd
Joined
Jul 25, 2005
Messages
412
Lo all.

No recent driver/software/hardware alterations, yet I've started receiving the above message at boot.

My PC usually boots within 7/8 passes of the XP blue bar (MCE 2005) but lately, it's been about 30 passes then the above error appears.

If I reset the machine, the error does not appear.

It seems to apply to cold boots only, although not every cold boot!

Any ideas?
 
probably a bad board, but could be a HD issue too. Run a HD tester from your drive manufacturer's site
 
OK, primary drive is;
Seagate Barracuda 7200.10 320GB, O/S, programs, files etc

Backup drive is;
Maxtor Diamondmax 9 160GB, backup drive for my files only.

I downloaded both Maxtor & Seagate's disk checking utilities, Seagate's tool will boot and run, I've done a quick check on both drives and it seems happy.

Seagate's tool however will not perform a full check on the Maxtor drive, it just hangs.

Maxtor's tool will boot, but it hangs at the "detecting drive" screen.

I'm pointing the finger at the Maxtor here.

Anything else I can try?
 
OK, primary drive is;
Seagate Barracuda 7200.10 320GB, O/S, programs, files etc

Backup drive is;
Maxtor Diamondmax 9 160GB, backup drive for my files only.

I downloaded both Maxtor & Seagate's disk checking utilities, Seagate's tool will boot and run, I've done a quick check on both drives and it seems happy.

Seagate's tool however will not perform a full check on the Maxtor drive, it just hangs.

Maxtor's tool will boot, but it hangs at the "detecting drive" screen.

I'm pointing the finger at the Maxtor here.

Anything else I can try?

If Maxtor's tool hangs at trying to detect the Maxtor drive then the drive's logic board is fried.
 
If Maxtor's tool hangs at trying to detect the Maxtor drive then the drive's logic board is fried.

Thanks for the response.

Is there anything else I can do to be absolutely sure that it is the Maxtor, prior to condeming old faithful to the bin?

BTW, does anyone know what warranty Maxtor offered on drives purchased in 2004?
 
After an evening of testing, I think I've got to the bottom of it.

The Maxtor 160GB ATA drive passes all tests from Maxtor & Seagate.
The Seagate 320GB SATA drive passes the quick test from Seagate only (Maxtor's tool can't test SATA drives).

The Seagate drive fails all "File Structure Tests" reporting that;

1 or more errors were found
1 or more file names contained errors
1 or more errors were found in the index
1 or more errors were found in the metafile.

What next? Will a format fix this? What caused it?
 
Back
Top