• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Stacker setup questions

P

pvtdonuts

Weaksauce
Joined
Mar 16, 2007
Messages
94
So I've got my stacker on the way and I'm planning on migrating everything over from my 900. Right now my plans have the PA120.3 mounted in the front of the case, with a shroud and 3 fans drawing air in from the front mesh. It will then be going to the D5 pump, to the fuzion, then 2 EK 8800GTS'. My first dilemma begins here; I have a spare siwftech mirco-res but i also have a DD derlin fillport on the way, but I'm not sure which I wanna use. I've heard that using a fillport is alot easier but that bleeding it is a bitch, so any input on that is appreciated, the tubing I'll be using is 3/8 ID and 1/2 OD. Secondly, since the PA120.3 is gonna be in the front, I will only have enough space for a optical drive and the front usb / power button. I have a raptor and a barracuda I will need to place somewhere in the case, so any sort of mounting suggestions are appreciated as well. Other than that, I think im set, so thanks in advance guys!
 
Retap the res with G1/4 threads, and use both. Put a barb in the top of the res, and run tubing to the fillport in the top of the case. If you have both laying around, why not have the best of both worlds?
 
You must log in or register to reply here.
Back
Top