![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Hey!
So i was just wondering, i have a 1.4 idle 1.36 load vCore 100% Intel Burn Test, Prime95 stable 1800 fsb (4.05GHz) overclock right now and it's fine as temps stay low.
However, when running Prime at lower voltages (much lower, as low as 1.26 vCore under load), only one core, "Core 0" fails, Core 1 will go on forever!
Is there anything i can do on the 790i to stabilize Core 0? Messing with GTL values? I know that's what you do with quads, but there's no guide posted on dual cores anywhere that i can find.
Any input is welcome, thank you.
So i was just wondering, i have a 1.4 idle 1.36 load vCore 100% Intel Burn Test, Prime95 stable 1800 fsb (4.05GHz) overclock right now and it's fine as temps stay low.
However, when running Prime at lower voltages (much lower, as low as 1.26 vCore under load), only one core, "Core 0" fails, Core 1 will go on forever!
Is there anything i can do on the 790i to stabilize Core 0? Messing with GTL values? I know that's what you do with quads, but there's no guide posted on dual cores anywhere that i can find.
Any input is welcome, thank you.