SSD not detected by Vista?

Dario D.

Gawd
Joined
Dec 8, 2004
Messages
582
Ok, so, my brother just got this Super Talent SSD to use as an OS drive, and Vista won't detect it (just popped it in first, as a secondary drive, to see if Vista would see it... you know, to make sure it works).

Well, it won't show up in My Computer. The BIOS can see it, and Vista will happily list it in Device Manager, but that's it.

We did some Googling, and tried everything known to man (including enabling Raid in the BIOS, following one suggestion), but nothing helped.

Any ideas? Is the drive just toast?

I don't know what motherboard it is, but it uses SATA 1 (this drive is SATA II, but the manual says it'll work fine on SATA 1) and, if it makes any difference, the drive is plugged into SATA Slot 1 (read that carefully). (The reason we didn't just put it into Slot 3 or 4 is because it will soon house the OS, and be the main drive). I know the SATA slot isn't defective, because, previously, the old hard drive was using it without issue.

We're about the return the drive, but just wanted to make sure we didn't miss some obvious step. All we basically did (as reflected in the manual) was essentially plug in the drive, and boot up the computer. (we messed with lots of settings, but then put them back)
 
Last edited:
Probably need to format it? I'm not sure how to do it in Windows but you can google it.
 
It won't show up in My Computer (and we also tried formatting it via Windows' Computer Management>Disk Management tool, as one search-result suggested, but it wouldn't show up there either).

Could it still be that formatting is required, just via a Windows disk or something?
 
Well, it won't show up in My Computer. The BIOS can see it, and Vista will happily list it in Device Manager, but that's it.

Did you go to disk management and initialize the disk? You're not going to see it in My Computer until you intitialize it, format it, and assign it a drive letter.

If Device Manager sees it, there should not be anything wrong other than what I stated above. Good luck.
 
Ah, that worked. Thanks. :)

Wait a minute... How's the average person supposed to figure that out??? And why is nothing about this written online, or in the drive's manual??

Every instance I came across of SSD-installation said, "Just plug it in and turn on the computer. It's just like installing any other hard drive." And I know my hard drives... (or so I thought. I have 3 internals, and an external)
 
Update: Hmmm, the benchmarks don't seem very good...
The Tom's Hardware benchmarks show this drive getting 221mbps average, not 176mbps. (look for Super Talent near the top) This wouldn't have anything to do with using a SATAII drive on a SATAI board, would it?

hddssd.jpg
 
Did you partition-align it? There are also different firmware updates..........some are designed for synthetic tests (sequential reads), others are designed for real-world performance I/O.
 
Did you partition-align it? There are also different firmware updates..........some are designed for synthetic tests (sequential reads), others are designed for real-world performance I/O.

Doesn't Windows 7 do this automatically?
 
Yep, unless you made a backup using Acronis and then restored the image, which can screw up your alignment. I'm not sure if he left the drive as a secondary drive on his existing Vista install or if he tried to image his current OS over to his SSD.
 
The drive is still sitting as a secondary drive with the existing Vista install. It will get reformatted again when Win 7 goes onto it, but first I want to make sure it's actually going to get speeds anywhere near the benchmark, because my brother is paying more than can be easily stomached for this. (after tax, it's just about $350, for 128gb) Edit: Hmm, looks like the price just dropped...
 
Last edited:
Sorry, didn't see the SATA I board part..........that could be part of it. Could also be the firmware revision.
 
I had to drop a complaint/support-request with Super Talent (which can only be done through their forums), because now I can't update the firmware due to a serial number anomaly. So, everything with this drive has pretty much gone to the toilet so far... (update: in fact, looks like there's a widespread performance issue with this drive)

Can anyone think of any other elements that they missed? Oh, they forgot to make the box impossible to open. (kudos for that. At least it came in a great box)
 
Last edited:
Well I have a motherboard that has the first gen sata ports that I was never able to make a sata hard drive (not SSD) visible for install. You might want to think about getting a Sata PCI card for the computer. If I spent that much money on a drive I would want it to have the fastest interface possible.
 
Back
Top