SSD failed when running 2 type of storage

jindov

n00b
Joined
Feb 26, 2015
Messages
2
Hi all,

I have a supermicro server with LSI MegaRAID SAS 9271-8i, running 12 HDDs in RAID 10 and 12 SSD in RAID0, but when we're running for a time, it's fail SSD raid (missing):


Slot Number: 11 - Online, Spun Up
Slot Number: 12 - Online, Spun Up
Slot Number: 13 - Online, Spun Up
Slot Number: 15 - Online, Spun Up
Slot Number: 16 - Online, Spun Up

as you can see, slot 14 is missing and cannot locate with megacli or anything, I need to reboot server and reconfig with raid utility. This error happen again and again.

Firmware of RAID card:

Product Name : LSI MegaRAID SAS 9271-8i
Serial No : SV34330144
FW Package Build: 23.32.0-0009

Mfg. Data
================
Mfg. Date : 10/25/13
Rework Date : 00/00/00
Revision No : 13D
Battery FRU : N/A

Image Versions in Flash:
================
BIOS Version : 5.48.04.0_4.16.08.00_0x06090700
WebBIOS Version : 6.1-73-e_73-Rel
Preboot CLI Version: 05.07-00:#%00011
FW Version : 3.440.05-3712
NVDATA Version : 2.1409.03-0137
Boot Block Version : 2.05.00.00-0010
BOOT Version : 07.26.26.219


Does someone has any idea of this case?

Thank you
 
Have you tried replacing the SSD? If so and it is continuing, it could be a bad slot.
 
a. Try moving the SSD to different physical drive slots. If disappearing act follows drive around, then it's not the slot or cables and likely the drive. A firmware update on drive "might" fix it.. might not in which case get another one.

b. If the disappearing issue does not follow the drive to different drive slots, then try rearranging the particular breakout cable connection to a different drive slot attachment. if the disappearing issue follow the connection, then it is likely to be the cable.

c. If the problem does not follow the particular cable connection, then take a hard look at the actual drive slot and it's connectors. Maybe try forcing SATA2 connect speeds on the particular slot using the LSI BIOS utilities (or software). If it works fine at SATA2 speeds, but not SATA3, then maybe bad interconnects or something on that particular slot.

Just some things to test...
 
Back
Top