SP35P2 PRO - Initial impressions, overclock, temps and pics

reasoN

Weaksauce
Joined
Dec 3, 2006
Messages
78
After a couple weeks of research I decided to build my first shuttle, as a hardcore gamer I decided to go with Shuttle's XPC PRIMA SP35P2 PRO. Here is a list of parts I used to complete the barebone:

e6750
eVGA 8800gt superclocked
2x2GB G.Skill PK's w/ OCZ Memory Cooler
vista x64
BenQ FP94VW Silver-Black 19" 2ms
Asus 20X DRW-2014L1T



I DID NOT reverse the fans as many have advised. I don't trust the 2 little outtake fans on the back of case to push all the hot air out by themselves, and didint like the idea of cpu heat being expelled inside the case. I put a generous amount of arctic silver 5 on the cpu (a straight vertical line down the middle) as explained in dual core AS5 application instructions. Popped in the video card, memory, and installed the OCZ memory cooler with an unnoticeable ghetto mod that I'll eleborate on in just a bit. The optical drive was installed without any adjustment to the push level and it opens smoothly. The machine booted up with no problems and I hit delete to get into the BIOS. After loading the optimized settings in the BIOS I installed vista x64 with no problems what so ever. Without installing any drivers I was able to connect to the internet and fully update vista, that took a little while. After my OS was fully updated I restarted the computer and installed ONLY drivers for video card, LAN, and audio. However, before installing video drivers I flashed the eVGA video card with a BIOS which fixes dynamic fan control, this fix can be found on their site. I will not attempt to install the chipset drivers until I find out it's safe to. There is a bug where after installing the chipset drivers usb ports don't function and this requires a full windows reinstall. I don't know if vista x64 is affected and I won't take a chance to find out. There is a fix for this on the shuttles website for XP only. Also I will not flash to a new bios since winflash is not supported in vista x64. When I need to, I will do it through DOS (USB bootable stick).




here are some pics...



The shuttle's size is perfect for carrying to lans. I still need to get a carrying case for it. The ocz memory cooler also blows air over the northbridge if mounted in a certain way, it will only mount on one side of the memory levers as the 90mm outtake fan doesnt leave enough room for another plate on the opposite side. I wedged a gskill sticker in between the other end and the fan and it nice and snug. :) The LED's on the memory cooler give a nice warm touch to the inside of the case and are visible through the case grates. The video card takes up about 80% of the case's length.




Soon I felt an itch to try my first overclock. I raised the cpu frequency from 333 to 400 and left the multiplier at 8. I set the memory multipier to 667 which with my processer gives me a 1:1 cpu:memory ratio. I only changed the DDR2 voltage to 2.1 as specified, leaving all other voltages on auto. I disabled C1E and virtualization. Fans were set to smart mode but I set the system fans to medium and the cpu fans to low instead, this gave me an acceptable level of noise and decent airflow. In vista Control Panel > Power Options, I selected "High-Performance" so the cpu wouldn't underclock using a lower muliplier as in the "Balanced" option. My computer has been on most of the day so I will now take a screenshot of idle temps of this overclock and post it here...



The temps are pretty good considering this is a shuttle, I would however like the northbridge temp to be lower than what it is (47*C), that's with the OCZ memory cooler installed. I will have to contemplate and come up with an idea to get the NB a little cooler. The overclock increased the NB temp by about 4-5 degrees, and the cpu about 6-9 degrees. I'm not concerned with cpu temps as it seems to be idling at a comfortable temperature (40*C) even on high-performance power mode. The video card is also at an exceptional temperature of 55*C.

I'm very happy with my first shuttle build. If anyone has any questions or input regarding the SP35P2 PRO, please post here. I will keep you updated. Load temps will be taken soon. Time to go play some more with my new toy. ;)

EDIT: after some searching I found out that the "motherboard" temperature in everest is not the northbridge, it's actually "aux" that reports the correct NB temp. Aux reports 43*C, I can live with that!
 
These Shuttles rock, I love mine -- especially after some minor modifications. Yours is a pretty similar setup to mine initially -- I did reverse the fans when I was putting it together however. I also did a few mods of my own to reduce system noise and temperatures. I was becoming increasingly annoyed with the stock cooling - it was either loud and cool or quiet and hot. I wanted quiet and cool so I made a few modifications. I am pretty sound-sensitive so some of this might probably not be necessary for most people but who wouldn't want a system that is both cooler AND quieter?

First I replaced my BFG 8800GT OC 512mb with a BFG 8800GTS OC 512MB. double slot card with massively improved cooling, and a little faster as well. [H] and BFG had a killer deal on it for $300... I run the following fan profile:
bioshockRTfan2.png


This makes it ramp the fan speed between 50% and 100% between 40C and 80C. As a result it idles around 45-48C and loads around 58-62C and is still very quiet, all the while my system has a healthy overclock (see sig).

Installing it was tricky because of all the cabling pushing up against the card -- exacerbated by my requirement of using IDE. A little rearranging of the cables was necessary, but not too bad.

Second I replaced the stock ICE fans (read in-depth post here), the 70x15mm with a Silenx 80x25mm and the 92x25mm with a Link Depot 92x25mm. For the 80mm fan I ended up removing the aluminum sheath that the 70mm fan attached to, and just used some silicone vibration dampening materials to fit it snugly against the drive cage. No elaborate mounting necessary.

Finally I added a Zalman Fan Mate 2 fan controller for the 92mm, since the fan I used was a 3-pin, not PWM. The Silenx fan, connected via a 3 to 4-pin molex adapter, is almost completely inaudible over everything else in the system so I don't mind that running at full speed, but the 92mm I like being able to set to minimum for leaving it running overnight while I sleep, or watching a movie or whatever. The system is VERY quiet either way, certainly far less noisy than my Xbox 360 right next to it. The fan controller fits nicely in the 3.5" HDD/floppy bay in the drive cage which has a well placed hole for the rather wide cable the fan controller uses. It is easily accessible from the front by popping open the lower bay door.

The new fans produce much more airflow and much less noise than the stock fans, resulting in cooler load and idle temps for all my components including CPU, northbridge, even the hard drives. CPU idles around 36C, NB 35C, HDDs 30C and 34C for IDE in drive cage and SATA above the optical drive, respectively.

I can run Crysis at 1920x1080 under 64-bit and DX9 on all High with r_sunshafts = 1 at very playable framerates, with an average framerate in the area of 30-45 FPS with occasional dips to 25 FPS e.g. in cutscenes and of course 60+ indoors. I'm about halfway through the game so we will see if it holds up through to the end, which I have heard gets progessively more demanding.

I can also run Bioshock at 1920x1080 under DX10 on all maximum settings with a constant 50+ FPS. I'm also probably about halfway through this game.

In short, both games are amazing on this system and this monitor. I haven't even touched my new Blu-Ray rewriter/HD-DVD ROM combo drive yet, at least not for playback -- waiting on that Pioneer 5.1 600W Xbox 360 sound system to come in for that ;)

As an aside I did actually install the LG BD-R/HDDVD drive and I was also pleasantly surprised at how much quieter it was than my previous optical drive, a Samsung SH-S203B. It did take a little more fiddling with to get the Shuttle eject button to align with the one on the optical though. The positioning of the contact plate for the Shuttle's false button is adjustable on the inside, by the way. But it is darn near silent under full operation... the Samsung was quite loud by comparison.
 
EDIT: after some searching I found out that the "motherboard" temperature in everest is not the northbridge, it's actually "aux" that reports the correct NB temp. Aux reports 43*C, I can live with that!

Yup, I actually had some discussion with one of the developers of Everest about that and it was fixed in a recent beta. Search for posts by Fiery on the Lavalys forums for links to the latest beta files.

Here's the latest I found.
http://www.lavalys.com/beta/everestultimat...ujs5mb8cxqw.zip

After upgrading to this new version, make sure to restart Windows to finalize the upgrade.

This also fixes memory timings not being reported.
 
Back
Top