Sound problem through HDMI fro HD4850

Rugby Lock

n00b
Joined
Jul 23, 2008
Messages
8
Right now I have an HD4850 connected by the HDMI adaptor and cable to my samsung syncmaster T260HD. The picture goes through fine but there is this strange alarm like sound playing along with the sound that is loud and annoying. Does anyone know what it is? Is there a way for me not to have the sound come through the HDMI cable and just use my Asus Xonar DX for all my sound?
 
Can you feed the Digital sound (that is currently connected to HDMI) straight into a sound system to see if its a problem with the sound data being fed to HDMI?

If the sound from digital out is fine, then the problem lies somewhere on the sound connection between the soundcard and the TV or the TV is wrongly configured / has a fault.
Check the connections are well fitted.
Make sure your TV is set to use sound from HDMI and not another input source.

If you cant get it to work, check if there is an analogue sound input.
You may be able to tell the TV to use that for sound straight from the soundcard.

This might be a good time to look at getting a nice Home Theatre sound system.
Get an amp that supports HDMI as that may be the solution, or later you can use HDMI audio (required for hi-def sound on Blu Ray).
For now if HDMI sound still fails, connect via analogue or SPDIF straight from the sound card.
Even a cheap (well chosen) setup will blow away the sound from a TV.
Welcome to the wonderful world of cinematic sound :)
 
Back
Top