Sonicwall newbie

Skylinerecording

Weaksauce
Joined
Oct 15, 2007
Messages
116
I have a question about Sonicwall firewalls. I'm fairly green with them I have a basic understanding of them I just haven't had much time under the hood. I just got a call from a client saying there software provider wants a specific outbound UDP port open for traffic from the server their software is one. Then they told me to just open all outbound traffic for that specific server. How would I open up the sonicwall to allow outbound traffic for that server from the sonicwall?
 
Update: I was told the reason they need this open is to allow large files to transfer better over the VPN. It's kinda start to seem a little fishy to me because I have 2 other offices that use this same software more intensively over VPN and have never been asked to do this. The only difference is I run OpenVPN at those offices and a sonicwall at this one.
 
I'm pretty sure by default Sonicwall allows any outbound traffic - many firewalls do this out of the box. Assuming you are more locked down, you would want to take a look at Firewall > Access Rules > Matrix > Lan -> Wan, if it is set to allow any any for all services, the Sonicwall isn't the problem.

If not, you will create an address object for this device, create a service object for the UDP port, then create a firewall rule. With it locked down like that, this shouldn't be much of a security concern.
 
I'm pretty sure by default Sonicwall allows any outbound traffic - many firewalls do this out of the box. Assuming you are more locked down, you would want to take a look at Firewall > Access Rules > Matrix > Lan -> Wan, if it is set to allow any any for all services, the Sonicwall isn't the problem.

If not, you will create an address object for this device, create a service object for the UDP port, then create a firewall rule. With it locked down like that, this shouldn't be much of a security concern.

+1 yep.

It does sound fishy since VPN don't block udp traffic or any traffic at all as long a the vpn zone is able to communicate with the zone the server is in.
 
They can access that software perfectly fine over VPN so everything is communicating and if outbound traffic wasn't open wouldn't they have an issue now accessing the software over VPN. I've just never had someone say we need to open up all outbound traffic b/c we are having trouble transferring large files over the VPN.
 
Now it's starting to make a little sense after I got a response from the software company. They are saying UDP 1196 isn't open for outbound traffic and they need it open to create a VPN connection with there servers for software updates. I just took this place over so a different company configured the firewall and they must have locked the network completely down for one reason or another.
 
Simplest way is to create a service for that port- name it whatever you want, then run wizard for a server connection, add that service, and voila- done.
 
Back
Top