Something is wrong, please help me figure out what

koosh

n00b
Joined
Apr 18, 2007
Messages
13
I hope I am posting in the correct forum for this, I didn't see a troubleshooting forum at all.

Setup: as posted in signature

So yesterday I was rebuilding my water cooling system, basically unplugged all cables, changed hoses, reconnected everything, and then started a leak test. After about a minute I noticed that my pump was plugged into a voltage controlled fan plug and wasn't running. The waterblock on the processor was SUPER hot, though i assumed it should have auto shut-off by that point being that hot (it was overclocked from 3.0->3.75). I made sure the pump was plugged in properly the next time, and also plugged in the monitor, keyboard, mouse etc. I get continuous power (fans going, PSU ok, pump power from fan headers etc) but no signal, and no real way of knowing if the bios is posting (no beeps). Also, no lights on the keyboard or mouse so I know it's not botting into windows without video.

I tried different video cards, so that's not the issue, I get beeps with no video card and with no RAM. It could be the PCIx port, though that seems unlikely since it wasn't overclocked or anything, and it's still recognizing when a card is out or in.

Would the power stay on continuously like it is if the processor was fried?

Would anything else produce this condition like cables plugged in wrong or something?

I'm nearly positive it's the processor that has gone to it's grave but I just want to make sure there aren't any other possibilities before I purchase a new one, especially since I thought it would have thermally powered off..

Thanks to anyone who can help
 
does it give you a correct beep code when you remove the cpu?

think of it this way: you *need* a new cpu anyway :)
 
Back
Top