Someone Please help me with with this!

AaronP

[H]F Junkie
Joined
Jan 13, 2005
Messages
11,527
I'm going to provide 2 pictures, 1 is the manuel layout of the Pins for the Power switch and etc, the other is the real life picture, now someone please label this thing for me! I've tested every single configuration I can to try to get the power to turn on, and I know it's not the PSU cause I did the paperclip trick and it works just fine

powerswitch1.jpg


powerswitch2.jpg


I'm aboslutely clueless on how they have this setup, if I put the HDD led on the 2 red ones the HDD light will light up so I guess that indicates the mobo is getting power.
 
If all you want to test is if it powers on, all you have to do is short (connect) pins 6 and 8 with a conductive object, such as a screwdriver, and release. That's all the power switch does. It will still power on even if no cables are connected to any of the pins.

Anyway, it's pretty straightforward... HD_LED_P = positive end of the HD LED cable, and N would be the negative. The polarity on the reset switch and power switch is irrelevant, so don't bother, it only matters on the LEDs. If the LEDs don't light up, then you have them reversed, and there's no harm from that, just power off and switch them around.

pwr.jpg


Not sure what the FP PWR/SLP pins are for (Front Panel Power/Something?), but guessing you have no use for them, unless they're the Power LED, which you'd hook up the same as the HDD LED if so.

P.S. I'm left handed, so writing with my mouse in a right handed setup isn't one of my strong points.
 
I'm getting really frustrated with this, it won't power on, I set it up like your picture had shown and it won't power up! :mad:

Tried the wires on my computer, the switches work just fine on the case...
 
Back
Top