SidewinderX
2[H]4U
- Joined
- Mar 30, 2004
- Messages
- 2,645
Hey guys,
I was planning on buying a few things, and I figured I'd run them by ya'll to see if anyhting jumps out at ya'll or anyhting...
First off: The rig as is:
http://s89737224.onlinehome.us/photo/PC/case.jpg
http://s89737224.onlinehome.us/photo/PC/case1.jpg
http://s89737224.onlinehome.us/photo/PC/opencase.jpg
It currently has a vantec stealth 92mm fan in the front, an 80mm in the side, and 2 80mm uv reactive fans in the back.
What I'm planning to do:
I can get a decent dremel for pretty cheap, so me and a friend are gonna split it. I'm planning on using it to cut the ducts that the case has on the back off (seen here: http://s89737224.onlinehome.us/photo/PC/backcase.jpg ), as well has cutting out a hole in the top of the case for another 80mm fan.
And then I was planning on buying this stuff for looks and to clean up inside a bit.
http://www.xoxide.com/uvsegr18rofl.html : green UV reactive round FDD cable
http://www.xoxide.com/gruvse24roid.html: 2x green UV reactice round IDE cable (24")
http://www.xoxide.com/1grwilo.html: 7' green wire loom (for good measure)
EDIT I'm stupid, fogot this
http://www.xoxide.com/colcatblac.html : UV cold cathode (and secondary bulb)
and another green UV reactive 80mm fan (for the top)
Anything horrible wrong with that?
I was planning on buying a few things, and I figured I'd run them by ya'll to see if anyhting jumps out at ya'll or anyhting...
First off: The rig as is:
http://s89737224.onlinehome.us/photo/PC/case.jpg
http://s89737224.onlinehome.us/photo/PC/case1.jpg
http://s89737224.onlinehome.us/photo/PC/opencase.jpg
It currently has a vantec stealth 92mm fan in the front, an 80mm in the side, and 2 80mm uv reactive fans in the back.
What I'm planning to do:
I can get a decent dremel for pretty cheap, so me and a friend are gonna split it. I'm planning on using it to cut the ducts that the case has on the back off (seen here: http://s89737224.onlinehome.us/photo/PC/backcase.jpg ), as well has cutting out a hole in the top of the case for another 80mm fan.
And then I was planning on buying this stuff for looks and to clean up inside a bit.
http://www.xoxide.com/uvsegr18rofl.html : green UV reactive round FDD cable
http://www.xoxide.com/gruvse24roid.html: 2x green UV reactice round IDE cable (24")
http://www.xoxide.com/1grwilo.html: 7' green wire loom (for good measure)
EDIT I'm stupid, fogot this
http://www.xoxide.com/colcatblac.html : UV cold cathode (and secondary bulb)
and another green UV reactive 80mm fan (for the top)
Anything horrible wrong with that?