Some HD questions - it's all about the clutter :)

ta7mike

Weaksauce
Joined
Nov 6, 2004
Messages
70
these are some simple questions, but need some answers. thanks in advance:

1) is it possible to put more than two HD's on a single IDE cable?

2) have an Antec Case (http://www.antec.com/us/productDetails.php?ProdID=90510), how many HD's can i put on my rig to max out capacity.

3) right now all my HD's are on the lower bays, not on the larger bays on the top. I'd rather put them to the top, but than my IDE cables are short, and cabling really becomes messy. any advice how I could clean up the IDE cabling. i am conscious about the clutter that's why i bought the OCZ modstream recently.

thanks a lot everyone!
------------------------------------------
MSI K8N Neo2 Platinum 939
AMD 64 3000+
OCZ Modstream 530W
RAM 756
HD 250, 160, 40
XFX 6600 GT
-------------------------------------------
 
1) No

2) I calculate 12, if you use (2) 2x3 drive racks in the 5.25" bays, and then put a drive in each of the (6) 3.5" bays

3) That's a question probably better suited for Case Mods, but you can try running flat IDE cables behind the motherboard
 
you can always get an IDE expansion or RAID card to have more HDDs. If you do that, you might want to get a SATA card and SATA harddrives so you can use the skinny cables.
 
Back
Top