A friend (harleybro) sent me his solid copper "mousepot" to do some dry ice testing on my E6700. The preliminary results are below, I haven't done the vcore mod to the board yet so I was limited to 1.63vcore (actual). Things should improve a LOT with the mod and 1.7-1.8vcore
E6700es
Asus P5B "Vanilla", vdimm, vdroop, vmch, vfsb mods
2 X 512mb Corsair PC5400UL
Cooling by DI in solid copper "Mousepot"
Pot mounted on board, minus top insulation...
This temp during SuperPi run at 4.68ghz..
Best mhz I could do at 1.63 vcore...
I did manage a sub 11sec 1M superpi run....
I really need to get the vcore mod done, should be able to better those results by quite a bit
E6700es
Asus P5B "Vanilla", vdimm, vdroop, vmch, vfsb mods
2 X 512mb Corsair PC5400UL
Cooling by DI in solid copper "Mousepot"
Pot mounted on board, minus top insulation...
This temp during SuperPi run at 4.68ghz..
Best mhz I could do at 1.63 vcore...
I did manage a sub 11sec 1M superpi run....
I really need to get the vcore mod done, should be able to better those results by quite a bit