Calefaction
Limp Gawd
- Joined
- Sep 1, 2004
- Messages
- 335
So I've been futzing with my 680i overclock for a few days now, and I've come up with some interesting observations (now that I have some D9 memory, I can play a little bit).
First, the setup:
Intel Core 2 Duo E6600
eVGA 680i
Current: 2GB Corsair 8500C5 (D9's)
Previous: 2GB OCZ PC2-8000 (non-D9's)
Not relevant to the OC, but still in the machine:
x2 7900GT SLI
X-Fi XtremeMusic
Prior to some tweaks I made this morning, I was having a very hard time even booting at > 400FSB, let alone staying stable. I am currently Othos / ITAT stable at 430 x 8, and I think I can go higher. So here's the observations I've had:
Anyways, I hope this helps someone else get the most out of their 680i. I am going to continue tweaking the OC, but I really think I can hit FSB 450 without much trouble, which is exciting considering I couldn't push over 400 yesterday.
First, the setup:
Intel Core 2 Duo E6600
eVGA 680i
Current: 2GB Corsair 8500C5 (D9's)
Previous: 2GB OCZ PC2-8000 (non-D9's)
Not relevant to the OC, but still in the machine:
x2 7900GT SLI
X-Fi XtremeMusic
Prior to some tweaks I made this morning, I was having a very hard time even booting at > 400FSB, let alone staying stable. I am currently Othos / ITAT stable at 430 x 8, and I think I can go higher. So here's the observations I've had:
- If you have vdroop, don't be afraid to push your volts a little. I am not sure if the droop is the board or the PSU (although I intend to change the PSU), but my bios says I am putting 1.525 volts through the CPU, but in reality it's 1.48.
- This board REALLY likes D9 memory. Beg, borrow and steal to find yourself some D9 based modules. See http://ramlist.ath.cx/ddr2/ to find that list.
- Don't ask me why, but putting the memory in the black slots, rather than the blue ones seems to have freed up the memory a bit. This is empirical at best of course, but this was also observed over on the eVGA forums.
- Don't be afraid to tweak your CPU FSB and MCP voltage a tad to stabilize the system out. (According to some, tweaking the SPP can help overall stability as well, though I haven't tried it yet).
- Absolutley, 100%, make sure you turn off all Spread Spectrum, Thermal Control and SpeedStep BIOS options.
- Get the Nvidia guide (link) and read it.
Anyways, I hope this helps someone else get the most out of their 680i. I am going to continue tweaking the OC, but I really think I can hit FSB 450 without much trouble, which is exciting considering I couldn't push over 400 yesterday.