• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Solution for 1st and 2ng Gpu Temp variation

D

Deacon_Jones1988

Limp Gawd
Joined
Dec 8, 2012
Messages
159
I know alot of ppl with sli/cfx setups have temp variations in the top and bottom card. The top card is usually warmer than the bottom my a decent sized margin. I have only seen this issue with open shroud coolers on gpus, I have had blower style coolers before on other gpus and this wasn't an issue.

What I'm wondinering is: Is ther anyone out there that would have any suggestions on a mod and/or fabrication that I could do to prevent the 2nd cards hot air from flowing up to the 1st card?

There is more spacing between the cards than some setups I have seen. There is one pci slot between the cards. I have a Phantom 820 chassis. (In case this may be relevant.)

I have been tossing around the idea of fabricating something to go between the 2 cards that will redeuce the hot air a bit. Because it rises straight from the bottom card to the top and my temps vary by about 10-12 *C. I would be interested to see any ideas you all may have.

Sorry if this is the wrong section to post this. I wasn't sure if I should put it in videos cards or the case modding section.

PS: I am away from home atm, if you would like me to post a pic or 2 of my setup I'll be glad too.

Thanks in advance.

Stay [H\
 
You must log in or register to reply here.
Back
Top