Socket 939 = SLI Only?

Ron Jeremy

n00b
Joined
Apr 30, 2003
Messages
27
I've decided to upgrade my system after a year of running an AMD Barton 2500+. Unfortunately I'm not as up to date on the current technology as I used to be. I've been looking at an A64 3000+. Everything is going to be purchased through NewEgg and I'm going to continue running my current video card, a Radeon 9800 pro AIW.

So my question is, socket 939 or socket 754? As far as I can tell, the difference between the two is that the socket 939 uses either the nvidia nForce4 or the via k8t890 chipset with sli technology (PCI-E and no AGP) and the socket 754 uses the nvidia nforce3 or via k8t800 chipset (no sli, retains AGP slot.) Are there any other differences that I don't know about?

I have no plans to invest in an SLI setup anythime now, or in the near future. If I'm going to continue running my AGP 9800 Pro, and want to upgrade to an A64 3000+ processor, what socket do I need and what motherboard do you recommend I pair it with?

All help is appreciated. Thanks! :cool:
 
Socket 939 uses AGP in the nForce 3 250GB Form, still a good chipset, just 'cause NF4 is out doesnt mean it's inferior or anything.
 
939 is the way to go as A64's in the future won't be produced in that socket. Semprons will transition to it eventually, but for higher end processors, going with socket 939 gives you an upgrade path S754 won't.
 
Thanks for all the help guys! Did some research based on your replies and I'm going with the MSI K8N NEO2 Platinum. Thanks again. :cool:
 
good board, have one myself.. been great from the get go.. You aren't losing out really anything by not getting a nf4 board, since PCIe doesn't offer any improvements at this time. All the high end cards will be out for agp for the next year at least (with some delay, I'm sure), SATA-II drives aren't out, and if they were, hard drives won't be pushing SATA-I specs yet.. NCQ is worthless on a desktop..

Really not much reason to go with a PCIe board at this time, unless you NEED SLI..
 
Ron Jeremy said:
Thanks for all the help guys! Did some research based on your replies and I'm going with the MSI K8N NEO2 Platinum. Thanks again. :cool:

We built my buddy's comp with that board. It is very fast and worked without a hitch. Booted first attempt, everything perfect.
 
Back
Top