MiG29TangentBoy
Limp Gawd
- Joined
- Nov 2, 2004
- Messages
- 377
OK, I have just updated from a Gigabyte nForce3 s754 setup to my current deal, the MSI K8N Neo2 Platinum and a 3200 Venice s939. At first the install was easy, I didn't even have to reformat WinXP or do a repair install...but now it freezes upon startup. Sometimes it gets to the desktop and freezes dead there, other times it will still be loading when it freezes. I am doing no overclocking whatsoever. It has the latest BIOS,too. DLED bracket shows nothing funny.
The Stuff:
MSI K8N Neo Plat. board
LBBLE stepping 3200 Venice
MSI 6600GT
Crucial PC3200 (2x512, but currently troubleshooting w. one stick)
Antec TrueBlue 480w PSU
1 Seagate 120G HDD
1 Samsung CD/DVD drive
The question is that it seems to be less grumpy if I use 1 stick of memory and a different video card, one that doesn't require a molex power connector (FX 5500 or MX4000 I use as spares). Could it (the 6600GT) be drawing so much power that it kills the setup? I see the rails should be up to this... (+5v @ 38a, +12@ 28a, +3.3@30a), but I can't think of anything else that explains it...any help is greatly appreciated! Thanks for reading.
The Stuff:
MSI K8N Neo Plat. board
LBBLE stepping 3200 Venice
MSI 6600GT
Crucial PC3200 (2x512, but currently troubleshooting w. one stick)
Antec TrueBlue 480w PSU
1 Seagate 120G HDD
1 Samsung CD/DVD drive
The question is that it seems to be less grumpy if I use 1 stick of memory and a different video card, one that doesn't require a molex power connector (FX 5500 or MX4000 I use as spares). Could it (the 6600GT) be drawing so much power that it kills the setup? I see the rails should be up to this... (+5v @ 38a, +12@ 28a, +3.3@30a), but I can't think of anything else that explains it...any help is greatly appreciated! Thanks for reading.