• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SN41G2 help.

K

Kite

n00b
Joined
Jul 5, 2003
Messages
42
I made a new system using Barton 2500+, Samsung 256mb ddr333 for my new shuttle sn41g2 and having a problem :(

When I first boot up it went smooth except that CPU is recognized as 1900+ instead of 2500+. So thinking that this was just FSB not set right, I changed to 166mhz from 100mhz and reboot but it fails to boot. When I reset and go back to BIOS, I find the FSB is still at 166mhz but when it boots, it says memory frequency is runnig at 200mhz and the CPU is recognized as 1900+ again.

Any thought?
 
thats the default setting if the shuttle has problem detecting the fsb for cpu/ram, check the cmos reset jumper isnt set. try setting the memory timings without changing the cpu fsb and see if that sticks, I'll check my settings later to see what I've got
 
You must log in or register to reply here.
Back
Top