slow traqnsfer rate in raid 5 need help!

crazyfied

n00b
Joined
May 19, 2008
Messages
4
Hi im trying to run a raid 5 with Adaptec AAR 2610SA and 3 seagate 750 7200.11. i tested my speed on hd tune 2.55 and only getting min 17.1MB/s, max 26 MB/s and average 22.8MB/s. I have no clue what to do to increase performances since this is my first raid 5.

current computer setup is
GA-P35-DS4 (rev. 2.0)
e8400
4gb gskill ram


if you need any other information about my current set up please let me know.

Thanks for your time and your help.
 
You have a rather old controller card. The processor on it is quite slow, so performance will be lacking. Honestly, there isn't much you can do. That controller card is only really worthwhile if you need to add another 16 drives without RAID to your system. As crazy as it may sound, you might want to ditch that card for a software based one (unless you want to spend a few hundred on a decent 4 port hardware RAID card). Supermicro makes an 8 port one that is pretty popular on this forum. You might want to look into that instead.
 
Those budget (and old) Adaptec cards are just that - budget and old, the performance is a bit spotty, unfortunately. You get what you pay for, I'm afraid. :(
 
Hi thanks for all the replies... Would the raid controller on the ga-ep35-ds4 be better for a raid 5 then the adaptec card?
 
It might be a bit faster, but neither options really gives you a lot of performance. If you do software RAID, there will be overhead since the processor will be doing the calculations. Honestly, only one way to find out if it is any better.
 
If i do software raid should i still keep the raid adapter card or should i just get rid of it since the mobo has like 8 sata ports
 
why not get the adaptec 31205 or the 5805 with the dual core proc on it tru hardware raid plus you have the option to run SAS drives or SATA and that's always a good option when the 20k SAS drives start poping up.
 
why not get the adaptec 31205 or the 5805 with the dual core proc on it tru hardware raid plus you have the option to run SAS drives or SATA and that's always a good option when the 20k SAS drives start poping up.
Not everyone has $600 to spend on a RAID controller?
 
Back
Top