SLI'ng pcie2.0 & 3.0

mmkmmk3

n00b
Joined
Jul 20, 2012
Messages
41
So I was looking at http://www.newegg.com/Product/Product.aspx?Item=N82E16813131823.
Found a good combo deal, however I noticed it had one pcie3.0x16 and one pcie2.0 ... not sure if by x4 or x16, I suspect if sli'd it's in x4.

What kinda of performance would I lose from using two pcie3.0x8x8 than what's in this board with a gtx 680 4Gb on a 1440p monitor.

Can I even SLI on those two slots?
 
That is indeed a Z77 chipset, but not wired for SLI. The only thing you can do on that board is Crossfire, no SLI.
 
That's an H61 chipset, no SLI at all. Something like this would be a better choice at the same price point.

It's still a Z77 chipset board, not an H61, just with lucidlogix for the hybrid graphics which means it doesn't have configurable routing of the PCIe lanes coming from the processor. Your suggestions are much better choices for SLI.
 
Oh :( thanks guys anyways. It was a used sale on the forums here for the board & 3770k for $320. If it had SLI I would've jumped on it. Too bad though
 
I'm curious though- How would two 680's perform on a board with one card in a PCIe 3.0 slot, and another in the 2.0 slot?
 
Just like they would perform if they were both in 2.0 slots.
 
I'm curious though- How would two 680's perform on a board with one card in a PCIe 3.0 slot, and another in the 2.0 slot?

Are you referring to the board in your sig? If so, you won't be able to run SLI. Nvidia certification calls for PCIe 2.0 x8 or PCIe 3.0 x8, minimum.

You can put them in the first two x16 slots which will make it PCIe 3.0 x8/x8. But the last x16 slot is wired for PCIe 2.0 x2.
 
I'm curious though- How would two 680's perform on a board with one card in a PCIe 3.0 slot, and another in the 2.0 slot?
That was my other question! :O

Just like they would perform if they were both in 2.0 slots.
Oh alright, makes since. Thanks!

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131819

$15 off with code that expires tomorrow PLUS a $25 rebate card.

UD3H would be a damn fine choice, as well.
If it fit my budget I would. Gotta buy all used parts though :mad:


Are you referring to the board in your sig? If so, you won't be able to run SLI. Nvidia certification calls for PCIe 2.0 x8 or PCIe 3.0 x8, minimum.

You can put them in the first two x16 slots which will make it PCIe 3.0 x8/x8. But the last x16 slot is wired for PCIe 2.0 x2.
So you can't run a card in x4? So if you're running a quad setup you need 4 x16 either x8x8x8x8 or x16*4. Not x4x4x4x4
 
So you can't run a card in x4? So if you're running a quad setup you need 4 x16 either x8x8x8x8 or x16*4. Not x4x4x4x4

Correct. While it would work with CrossFire (assuming the board was certified for such), it won't work with SLI. And some boards with that type of configuration won't do SLI either. A good example is if they use a Hydra PLX chip such as the MSI Big Bang-Marshal. That board cannot do anything more than 2-way SLI despite having all of those PCIe slots.
 
Correct. While it would work with CrossFire (assuming the board was certified for such), it won't work with SLI. And some boards with that type of configuration won't do SLI either. A good example is if they use a Hydra PLX chip such as the MSI Big Bang-Marshal. That board cannot do anything more than 2-way SLI despite having all of those PCIe slots.

Well thanks for the info! just curios overall. I wont be xfire;'n for the foreseeable future & I don't think I'll be doing anything but dual SLI!
 
I'm curious though- How would two 680's perform on a board with one card in a PCIe 3.0 slot, and another in the 2.0 slot?

Like a single 680, because nVidia won't allow you to run SLI.

Just like they would perform if they were both in 2.0 slots.

Nope. Even if nVidia allowed you to run SLI with the x4 slot, performance would be lower because the x4 slot is connected to the chipset, not the CPU.
 
Nope. Even if nVidia allowed you to run SLI with the x4 slot, performance would be lower because the x4 slot is connected to the chipset, not the CPU.

I thought this was hypothetical... 1 gpu in a x16 3.0 slot and another in a x16 2.0 slot. Did I misread somewhere?
 
I thought this was hypothetical... 1 gpu in a x16 3.0 slot and another in a x16 2.0 slot. Did I misread somewhere?

It doesn't matter as a hypothetical because it can't exist with current chipsets. For x16 slots its all or nothing, you either get 3.0 or 2.0 and no combination thereof. If the board supports 3.0 GPU's any remaining 2.0 lanes go to the PCH rather than the CPU and can't do SLI (usually a couple x1 slots or maybe an x4 wired full size slot).
 
It doesn't matter as a hypothetical because it can't exist with current chipsets. For x16 slots its all or nothing, you either get 3.0 or 2.0 and no combination thereof. If the board supports 3.0 GPU's any remaining 2.0 lanes go to the PCH rather than the CPU and can't do SLI (usually a couple x1 slots or maybe an x4 wired full size slot).

I'm well aware of that. :)
 
I need a big labowski picture for this... "I understand that, dude".

+1 internets, for you. Dude.

Maybe all the scoring screens in every bowling alley will be upgraded with AMD APU's. 10 minutes of Far Cry 1 for every strike.
 
Back
Top