Slim mATX case with vertical GPU mounting.

Aegir

Limp Gawd
Joined
Apr 15, 2020
Messages
202
Slim. Lithe. Tight. Powerful.
This is going to be a media PC, which lies on its side flat.
I want it as small and flat as possible, so let me know if you have any case recommendations.
 

mtrupi

Gawd
Joined
Mar 26, 2007
Messages
755
I built a PC with a Rosewill R379-M many years back (10+ maybe) mainly because it was inexpensive. For size they are mostly just like this.
 

Nobu

Supreme [H]ardness
Joined
Jun 7, 2007
Messages
4,314
There's one or two in the sff forum. Workin now, but there are some more on amazon/newegg, etc that I know of. Will lookem up later.
 

branana

Limp Gawd
Joined
Apr 10, 2004
Messages
305
There's also this one if you like a slim form factor, somebody put a mATX threadripper build into a Salvo Studios S401

 
  • Like
Reactions: Nobu
like this

whateverer

[H]ard|Gawd
Joined
Nov 2, 2016
Messages
1,246
You want a flat case that lays like a pizza bx, right?, but do you want the GPU parallel to the motherboard, or perpendicular/?

It's much easier to do horizontal (without limiting your to half-height cards.)

Also, you're going to find a lot more custom Mini ITX cases in that category, so be prepared to compromise. As ther have said, check out the SFF forum.
 
Last edited:
  • Like
Reactions: Aegir
like this
Top