Slim atx case?

[munitis]

Hi!
I am looking for a slim, lightweight atx case as small as possible. I don't find many options. Any recommendation?.

 

[Dopamin3]

Most of the time you would just build a mini ITX system (or maybe micro ATX) if you wanted something lightweight and a small as possible. A full size ATX case is never really going to fit the bill.

I would maybe recommend checking out the Thermaltake Core G3, it might work for you.

 

[OFaceSIG]

I have built dozens of mATX machines and you can get them very small and light. One with half height card slots usually get's it pretty light.

 

[munitis]

Which matx case do you recommend for less than $ 100?

 

[OFaceSIG]

Which matx case do you recommend for less than $ 100?

What kind of add on cards are you planning on using?

 

[Vengance_01]

Which matx case do you recommend for less than $ 100?

Thats a loaded question. What is the purpose of the build? Does it need to be portable? Noise levels? Components going into the build?

 

[munitis]

this is a configuration with motherboard atx, i would have to change it for a micro atx. but it would be something similar to this.

https://pcpartpicker.com/list/rDXpMc

 

[Vengance_01]

Heatsink will need to be changed. Also go ITX. Unless you need expansion card slots, no need. Example of a decent case

https://www.silverstonetek.com/product.php?pid=771&area=en

Also look at this heatsink. Perfect for ITX/Small form factor builds

Scythe Shuriken 2 CPU Air Cooler, 92mm Low Profile (58mm Tall), Intel LGA1151, AMD AM4/Ryzen

I use this Mobo with my 3600x with no issue:
ASUS ROG STRIX B450-I GAMING AM

 

[OFaceSIG]

this is a configuration with motherboard atx, i would have to change it for a micro atx. but it would be something similar to this.

https://pcpartpicker.com/list/rDXpMc

You have a quadro card in there (you a CAD guy?). That's a full size card. You won't be able to do anything slimline with that card. Also, your cooler as others have said is too tall for slimline or half height cases.

If you want those two components you're going to need a standard height case. No two ways around it.

 

[munitis]

That's a setup that was made without thinking about the case. When I find a slim case I will modify the components as necessary to fit it inside.
The card is not too big:

https://www.pny.com/nvidia-quadro-p2200

The cooler could be replaced by something like this:

http://www.cryorig.com/c7.php

Yes, it is a configuration designed to work with cad

 

[OFaceSIG]

This is a possiblity and will let you run any video card you want.

https://www.thermaltake.com/C_00002936.htm

 

[munitis]

This is a possiblity and will let you run any video card you want.

https://www.thermaltake.com/C_00002936.htm

That may be the one I like the most that I've found so far, but it still seems too big

 

[OFaceSIG]

This one is super baddass. I'd love to use it for a build, but it's over $200

https://www.silverstonetek.com/product.php?pid=133&area=en#fgo-spec

 

[Vengance_01]

This one is super baddass. I'd love to use it for a build, but it's over $200

https://www.silverstonetek.com/product.php?pid=133&area=en#fgo-spec

https://www.silverstonetek.com/product.php?pid=771&area=en

 

[Denpepe]

The only slim one that comes to my mind is this one but it is not small by any means

 

[OFaceSIG]

https://www.silverstonetek.com/product.php?pid=771&area=en

Holy sheez balls! That one looks like a winner!

 

[munitis]

https://www.silverstonetek.com/product.php?pid=771&area=en

This is Mini-ITX