SLI Problems..Please help!

Vader

Supreme [H]ardness
2FA
Joined
Dec 22, 2002
Messages
5,139
OK...here are the specs to my new system:

Lian Li 1000VB w/Antec 480 Watt TrueBlue PS
Asus A8N-SLI Deluxe w/BIOS REV 1004
Athlon 64 Winchester 3500 w/Zalman 7000AlCu
2 x 36GB Raptors in Raid 0 Array on Silicon Image Controller
2 x eVGA Geforce 6800GT's
SB Audigy 2 ZS
ATI TV Wonder
Plextor 8xDVDRW

Ok..right now i'm at wits end. Here is what i did:

HARDWARE

1. Made sure that I changed the Dual Video Card Connector Bridge is set to DUAL VIDEO CARDS.

2. Both Video Cards are stock, and the SLI Bridge is connected between them secured by the additional bracket.

3. Tried SLI and AUTO in the BIOS to detect the SLI setup.

4. EZ plug warning is set to enable

5. Each Video Card has it's own power cable as well as the EZ plug, both Vidcards display a green light when on and working and they are both lit. The EZ plug warning light is NOT on which shows it is also getting power.

SOFTWARE

1. Fresh Install of WinXP PRO SP2 w/All updates

2. Installed Latest 6.39 Nforce 4 Drivers from Nvidia Site

3. Installed latest Nvidia Certified SLI Driver 66.39, tried a whole bunch of other Beta drivers.

PROBLEMS

1. System boots fine and display is fine, however when I go to the SLI Adjustments in the driver Control panel it reads something along the lines of:

Please remove any non-SLI capable graphics cards. You must have SLI enabled graphic cards for SLI to work correctly

Then there is a link: For more information please click here which takes to to the NVZONE page on SLI.

I've also made sure that both video cards work by themselves and they work fine. Everything appears correctly, Reseated everything numerous times, tried different power connections..etc.

Also both video cards show up in Device manager, no issues..can enable them also in the Display settings to show both...it's really strange...

Please help, my $800 video cards are just sitting there. I'm at the end of my rope here.
 
I think that your problem is that your graphics cards do not have the correct bios.
Find the one that is apparently sli enabled, and then flash that ones bios onto the other.
this has happend before with other people, and for the sli to work, they must have the same bios

also, i would reccomend getting a new PSU, as 480 watt is not really enough.
f
 
Well that makes sense. I bought the FIrst Card OEM from Monarch and the Second retail from eVGA. The BIOS's are probably different. I'll check and post my findings.
 
freddiepm61, Thanks for telling me the obvious. It was the Same BIOS, different SubSystem ID's...very wierd cause both cards had the same Revision numbers..etc. So I took the Retail BIOS, backed it up, then flashed the OEM card with it and now all is great!

SLI totaly rocks...just for fun, I loaded up Halo 1.6 and played the second level on that Island @ 1600x1200 4AA 8XAF extremely smooth and it looked great.

Next is Far Cry and then on to HL2/CS: Source!

Thanks! ;)
 
not to crap on your thread, but the fact that you need modern SLI technolgoy to run an old game like halo decent is kinda humorous...that thing was so poorly written....

glad you got it working, filing that bit of knowledge away!
 
Back
Top