Sleeving cables myself using BitFenix Alchemy sleeve?

you missed what I was asking, I dont want extensions..

I want to sleeve my entire PSU with the same type of sleeving used in bitflex's extensions
 
Last edited:
Quite sure that Bitfenix doesn't sell sleeving, only pre-sleeved extensions. Also quite sure that there is heatshrink involved, likely just tucked carefully into the connector so that it doesn't show.

The sleeving used on the extensions looks more like paracord than traditional sleeving.

Paracord is significantly less expensive and has a more fabric-like texture, while things MDPC-X is stellar but made from a different material and is considerably more expensive, though it is easier to work with.
 
MDPC-X still looks like your average nylon plasic sleeving, looking for something more like texture(almost like clothing or BitFenix :))
 
Then get paracordas thats basically what bitfebenix type sleeving is.

For paracord, Heres a very good place to get it and cheap too:

http://ftwpc.com/cables-and-sleeving/paracord-sleeving.html

8 cent a foot, cant beat that ;)

Eventhough MDPC-X is the sleevers FTW sleeving, Mod/Right Kobra sleeving is pretty good too.

And MDPC-X is far beyond 'average' sleeving.

-AND- you still have to use heatshrinks even if you use paracord, kobra, mdpc-x or any other unless you know how to get the sleeving under the connector.
 
Then get paracordas thats basically what bitfebenix type sleeving is.

For paracord, Heres a very good place to get it and cheap too:

http://ftwpc.com/cables-and-sleeving/paracord-sleeving.html

8 cent a foot, cant beat that ;)

Eventhough MDPC-X is the sleevers FTW sleeving, Mod/Right Kobra sleeving is pretty good too.

And MDPC-X is far beyond 'average' sleeving.

-AND- you still have to use heatshrinks even if you use paracord, kobra, mdpc-x or any other unless you know how to get the sleeving under the connector.


Ahh, paracord, of course, thanks!

Still looking for other options similar to paracord, before I buy anything

Yeah I see now that it looks like im not gunna get out fo using heatshrinks
 
Then JUST get paracord :p

I have some MDPC-X sleeving and its definately NOT plastic-like.
 
Then JUST get paracord :p

I have some MDPC-X sleeving and its definately NOT plastic-like.

I just want to know if I am missing any companies before i buy paracord :)

what is MDPC like then?...cuz from pictures it looks like that
 
Unless you actually have it in hand, dont judge it. If you wish, I could send you a couple samples of modright, mdpc-x and you can see for yourself ;)
 
Unless you actually have it in hand, dont judge it. If you wish, I could send you a couple samples of modright, mdpc-x and you can see for yourself ;)

I didnt mean to make it sould like it was bad :)

If you wanna send a little sample that would be great :p, ill send a PM
 
extremely great work at an extremely huge price tag...$75 for just the 24pin...WOW
I guess you get what you pay for right!
 
extremely great work at an extremely huge price tag...$75 for just the 24pin...WOW
I guess you get what you pay for right!

Sounds about right. Even a quick hack job of a 24pin individually sleeved cable takes a considerable amount of time to do, nonetheless taking the time to make it (near) perfect.
 
Back
Top