Sleeving an Antec NeoPower

[Hexus0]

Hey everyone, I'm going to sleeve my Antec NeoPower480w soon, and I was wondering before I buy a sleeving kit (and the molex pin extractor [if I need it]) will I be able to fit the sleeves over the back of the wires (not the molex but the part that connects to the PSU itself) so I wouldnt haven't to take off the molex? or would I be better off buying a molex pin extractor and doing it like that?

Like this part right here (yellow and black wire with the black thing on the end)

 

[Skin]

its really easier than it looks. with a pin extractor you could probably do a full psu in an hour.

 

[aldy402]

just buy a sleeved NEOPOWER cable kit from performance-pcs.com. only around 10 bucks

made esp. for the neopower

 

[hound]

I would suggest a pin extractor, as it saves your finger/reduces the risk of breaking wires. You might be able to get the sleeving over the connectors, but I would worry more about the heatshrink.