Size matters

Joined
Jun 20, 2004
Messages
44
I figure this is probably the best place as any for suggestions. I'm trying to figure out the cheapest smallest motherboard for a little non-conventional computer side project. The mother board has to useful enough so I can at least game on the thing when I'm done. Thus far I've checked out the NewEgg refurbished mobos, which are relatively cheap but where they give dimensions its 30x24 cm or bigger. So now I ask those of you who are far more knowledgable than I (a.k.a. probably all of you), any suggestions for a good, cheap, small motherboard? Thanks
 
Johnny Lightning said:
I figure this is probably the best place as any for suggestions. I'm trying to figure out the cheapest smallest motherboard for a little non-conventional computer side project. The mother board has to useful enough so I can at least game on the thing when I'm done. Thus far I've checked out the NewEgg refurbished mobos, which are relatively cheap but where they give dimensions its 30x24 cm or bigger. So now I ask those of you who are far more knowledgable than I (a.k.a. probably all of you), any suggestions for a good, cheap, small motherboard? Thanks

Good cheap and small are hard to come by in the motherboard market- but there are a few options that are available to you.

The VIA EPIA mini-ITX formfactor boards are the smallest things going, typically cost between 100-200 (including processor and on-board everything), but don't plan on any real gaming (unless you have one heckuva PCI graphics card)... The CPU's tend to be 1-1.2 Ghz C3's, which almost perform as well as the equivelant Celery. These boards make great car-putars. (17x17cm)

There are some ITX PIV based motherboard, but with the same problem of no good gaming option.. this would be a bit more expensive to do.

There is also a formfactor called flex-ATX, most commonly found in Shuttle's XPC line of barebones kits. You can purchase these straight from shuttle as replacement boards, but expect to pay too much. You can also check out eGay and the forums here to find ones that people are unloading. These typically have an AGP slot and are very flexible in terms of processor that you can put in them, but they are bigger than the ITX form factors. My favorite of the Athlon ones is the FN45N (which is found in the XPC SN45G).

As you can see... this is a rather limited playing field, and it will probably cost you more than you want it too..... However... if you do go with the ITX board, and finish with it in a few months and are willing to sell it for a loss... i'm in the market :D
 
Schro said:
Good cheap and small are hard to come by in the motherboard market- but there are a few options that are available to you... ...i'm in the market :D

Thanks, this gives me a good idea to go from.
 
Johnny Lightning said:
I figure this is probably the best place as any for suggestions. I'm trying to figure out the cheapest smallest motherboard for a little non-conventional computer side project. The mother board has to useful enough so I can at least game on the thing when I'm done. Thus far I've checked out the NewEgg refurbished mobos, which are relatively cheap but where they give dimensions its 30x24 cm or bigger. So now I ask those of you who are far more knowledgable than I (a.k.a. probably all of you), any suggestions for a good, cheap, small motherboard? Thanks

Go here:
http://www.mini-itx.com/

They have a link to an ITX P4 board...I'm impartial to the P4 VS AMD !!!!!!ism, if you want a small system with some balls then the ITX P4 will probably be it. Unless you can get an AMD Geode ITX board, but they run about $600 for the developers board with a 1.4GHz geode cpu on them..

Later

MD
 
Stiletto One said:
Um. More info please?

Sure, mini-ITX is tiny, but is microATX too big?


Its not so much of an issue of too big or too small. I'm just curious what's out there and how it all compares to each other. I'm asking so that others more in the know than I can throw in suggestions. More or less I want something smaller than the average 30cm x 24cm, the smaller the better. But as you get smaller you get more expensive. Its all just a balancing act for my curiosity right now.
 
Back
Top