Site Survey For Wireless

rosco

Gawd
Joined
Jun 22, 2000
Messages
722
I am working with someone who has a large parking lot. They need wireless access out by all the vehicles in this lot.

They currently have wireless coverage but some of their devices don't have as good wireless reception as others due to their antennas etc.

So, I want to do a survey of the lot to determine where the areas with the weakest signal are so I can come up with a plan .

What software/procedure would you recommend to do that?

I have a couple apps on my android phone that show my wireless signal strength but I guess I'm looking for something that could combine my gps location with signal strength to help me map it out.
 
Make sure the survey you perform is performed with a good antenna/adapter set. If you try it with the built-in internal antenna on a laptop you will not get reliable results.
 
I think you should also try TamoGraph, http://www.tamos.com/products/wifi-site-survey/. I've tried Ekahau, AirMagnet, and TamoGraph (the big three names in Wi-Fi site surveying), and TamoGraph seems to be the best. Surprisingly, it is also the least expensive of the three.

And I wouldn't use Android for site surveys, there is simply no professional grade site survey software for that platform. I've tried Wolf Enterprise (or something of the kind) and another one (can't remember the name). Both were rubbish.
 
Thanks for the suggestions.

It turns out that a lot of the reason we are experiencing troubles out on this lot is that there are a LOT of other wireless access points in the area.

I had someone come out with a small fluke meter and several times it would say the signal had failed. The reason wasn't because our signal was too weak, it was because of all the interference of neighboring business/apartment wireless networks.

What can I do to overcome that obstacle? I know normally you don't want to have an access point every 50ft as it is counter productive. However, is that the route I need to go here?
 
Thanks for the suggestions.

It turns out that a lot of the reason we are experiencing troubles out on this lot is that there are a LOT of other wireless access points in the area.

I had someone come out with a small fluke meter and several times it would say the signal had failed. The reason wasn't because our signal was too weak, it was because of all the interference of neighboring business/apartment wireless networks.

What can I do to overcome that obstacle? I know normally you don't want to have an access point every 50ft as it is counter productive. However, is that the route I need to go here?

I only really see two options here:

1) Find an expert who can help you work around the extreme interference. This isn't something you want to try on your own.

2) Use a less saturated band (5ghz wifi).
 
I agree with shade91. Moving to 5 GHz might be the only option. Or use a site survey tool to identify the 2.4 GHz channels with the least interference and try to configure your APs to use these channels. Then perform an active survey to verify if real-world performance is acceptable.
 
Back
Top