Good afternoon all,
First let me say i have been researching this topic as much as possible before i start building my new machine. I could not find a solid answer on this so decided to ask the experts. Parts are coming in now so before I start cutting up my case and what not want to make sure i do it right the first time.
With that said yes i know dual loops is the standard but ill be honest and say i did not want to go that route if a single loop will be fine for me. Im not trying to win over-clocker of the year (probably just hit 4gigs on the chip at most) and i will be leaving the gpus at stock settings. Based off of research i purchased the following items.
Case: Corsair 800d (for the 120.2 going to do a side mount on the bottom cutting the side back panel and using a rad guard)
Pump: Swiftech MCP655 with speed thingy
Rads: XSPC RX360 & XSPC RX240 (going to do push/pull with gentle typhoons)
Blocks: Swiftech APOGEE XT
EVGA gtx 480 hc ftw x2 (already blocked)
EK Full board block for the ASUS Rampage 3 extreme
Bitspower Water Tank Z-Multi 250
Barbs: 1/2
Tube: 1/2 ID 3/4 OD UV Green
Liquid: Distilled water and silver killcoil (wasted $40 on Feser 1 UV green before i saw what that crap does. Really want the cool liquid color but not worth the risk so leds and colored tubing will have to do
So now that you know what i am working with and the fact I am not trying to push the system to the max i assume this will be fine. Based off of this would my assumption be correct? Just want to make sure my temps wont be close the max and will be in a safe range. Lastly with all the blocks the pump will be able to push just fine correct? I keep reading yes but again confirming this. Thank you for taking the time to read this and look forward to hearing back from you guys/gals.
First let me say i have been researching this topic as much as possible before i start building my new machine. I could not find a solid answer on this so decided to ask the experts. Parts are coming in now so before I start cutting up my case and what not want to make sure i do it right the first time.
With that said yes i know dual loops is the standard but ill be honest and say i did not want to go that route if a single loop will be fine for me. Im not trying to win over-clocker of the year (probably just hit 4gigs on the chip at most) and i will be leaving the gpus at stock settings. Based off of research i purchased the following items.
Case: Corsair 800d (for the 120.2 going to do a side mount on the bottom cutting the side back panel and using a rad guard)
Pump: Swiftech MCP655 with speed thingy
Rads: XSPC RX360 & XSPC RX240 (going to do push/pull with gentle typhoons)
Blocks: Swiftech APOGEE XT
EVGA gtx 480 hc ftw x2 (already blocked)
EK Full board block for the ASUS Rampage 3 extreme
Bitspower Water Tank Z-Multi 250
Barbs: 1/2
Tube: 1/2 ID 3/4 OD UV Green
Liquid: Distilled water and silver killcoil (wasted $40 on Feser 1 UV green before i saw what that crap does. Really want the cool liquid color but not worth the risk so leds and colored tubing will have to do
So now that you know what i am working with and the fact I am not trying to push the system to the max i assume this will be fine. Based off of this would my assumption be correct? Just want to make sure my temps wont be close the max and will be in a safe range. Lastly with all the blocks the pump will be able to push just fine correct? I keep reading yes but again confirming this. Thank you for taking the time to read this and look forward to hearing back from you guys/gals.