Since the single core dont cut it. New system

Joined
Dec 17, 2008
Messages
25
Looking to build a new general purpose system.

1) What will you be doing with this PC? Light gaming, web browsing and video streaming.
2) What's your budget? Do not have a set budget, looking for quality parts that will last a few years. No need to go crazy.
3) Where do you live? East Coast USA
4) What exact parts do you need for that budget? Everything within the case
5) If reusing any parts, what parts will you be reusing? 22" LG monitor
6) Will you be overclocking? Maybe later, would like the possibility to do so later in life to extend usability.
7) What size monitor do you have or plan to have? 22"
8) When do you plan on building/buying the PC? Within new few weeks to a month
9) What features do you need in a motherboard? mAtx

Mini Antec P180 : 79.99 @ newegg w/code
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129041

Bfg Tech 550W EPS12V Power Supply $46.49 AR @ Buy
http://www.buy.com/prod/bfg-tech-550w-atx12v-power-supply-bfg-tech-550w-eps12v-power-supply/q/loc/101/207955009.html

OCZ Fatal1ty Edition 4GB (2x2GB) 240-Pin DDR2 SDRAM DDR2 800 $35.99 @ Newegg
http://www.newegg.com/Product/Product.aspx?Item=N82E16820227334

Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drive $64.99 @ Newegg
http://www.newegg.com/Product/Product.aspx?Item=N82E16822148288

Which leaves me open for
Motherboard
CPU- I prefer AMD for no good reason, but will take any valued option.
GPU- hope to pick up a few weeks later to help reduce initial cost.

I hope to order Case, PSU and Memory tonight unless someone has a much better opinion.

Thank You All
 
because I have that particular board and love it. Its stable as hell and has just about everything he would need. What does the 780g board have that the 780v doesnt?
 
780G has a few more ports and uses ATI Radeon HD 3200 vs 3100 on the V, from what I am able to read.
Any reason you reccomend the G.Skill over the OCZ?

Not to question your opinions, the more I can learn the better decision I can make.
THNX
 
the onboard graphics dont really come into the picture as you are buying a gpu.

As for the ram take a look at the voltage required, the OCZ are at 2.1(2.2 being pretty much the ceiling for ram), which gives you timings of 5-4-4-18 which is slow, so little to no room for overclocking of the ram and cpu. The G.Skill are better timings and at a much lower voltage(which leaves room if you overclock the cpu). It has timings of 5-5-5-15 and will probably oc to 4-4-4-12 @ 1.9-2.0v.
 
I agree with Hossdaddy's suggestions, though, either RAM will do fine, IMO. Then again, I do like to keep RAM near JEDEC spec, which is 5-5-5-15 @ 1.8v for DDR2-800.
 
Back
Top