Show Your Watercooled Game Console!

kookoo102

Limp Gawd
Joined
Mar 4, 2009
Messages
455
Not sure if there are many people with watercooled game systems or not...
If you have one... post it up.

Here is my 360.

Lian-Li case
Swiftech MCP350 pump
2x Koolance vga block
Side Thermaltake Rad with 120mm fan
Danger den Fillport
120gb HDD
Rear 120mm Lian-Li fan
DSC_0278.jpg

DSC_0282.jpg

DSC_0284.jpg
 
I don't have any sort of modded console, let alone a water-cooled one, but that's a pretty cool 360 you modded.
 
damn, how much did that all cost you?

i just went through the X-clamp fix, but tearing it down again for a very nice looking water cooled set up looks like an ever better option :D
 
damn, how much did that all cost you?

i just went through the X-clamp fix, but tearing it down again for a very nice looking water cooled set up looks like an ever better option :D

Was not too bad..
lian li case $120
2x Koolance vga block $29 each
Swiftech MCP350 pump $55

I had all the parts to a thermaltake watercooling kit i never used so that is were the 120mm fan and rad came from.

Thanx for the comments.
 
Very nice piece of work. Been considering getting an Xbox 360 for myself recently since I've been doing X-clamp fixes for several people, but I'm still just not a gamer so, the PC will just have to do. ;)
 
Nice but I think this is really rare I couldn't even find single PS2 fanswap thread :(
 
looks brilliant, i wish consoles came in PC type cases as standard :p atleast then they wouldnt die all time.

ah man i wish i had the technical know how to pull off something like this :(
 
If you can install a case with watercooling then you can do this too. 360 hardware is very very very similar to PC.
 
I'm going to go out on a limb here, and guess there aren't too many water-cooled console owners here. Perhaps if this was just a thread on modded consoles, and not specifically water-cooled, we'd have a few more pictures posted.
 
does spilling mountain dew on my ps3 is considered watercooled?
 
I'm going to go out on a limb here, and guess there aren't too many water-cooled console owners here. Perhaps if this was just a thread on modded consoles, and not specifically water-cooled, we'd have a few more pictures posted.

I'm sure there are, they just need to see the thread ;) I've seen em in the past on the [H].. maybe not as [H]ard as the OP here, but nicely chilled. Perhaps change the title of this thread to "Show me your [H] console"?
 
I'm sure there are, they just need to see the thread ;) I've seen em in the past on the [H].. maybe not as [H]ard as the OP here, but nicely chilled. Perhaps change the title of this thread to "Show me your [H] console"?

I was wondering if there was anyone else that has watercooled consoles and if i should even put this thread up.

can i change the title still?
 
Bump for awesomeness and high-quality modding. :)

Makes me wonder what the idle and stress temperatures before-and-after are.
 
Your work looks good man.

I have some questions about the case itself:
How do you eject the disc?
It looks like (at least on the rear) that the connections do not meet the case and line up properly. Is this the case, and it is like that for the front USB connections as well?
Where does the HDD fit?
 
I was wondering if there was anyone else that has watercooled consoles and if i should even put this thread up.

can i change the title still?

Yeah, you should be able to under Thread Tools at the first post.
 
Bump for awesomeness and high-quality modding. :)

Makes me wonder what the idle and stress temperatures before-and-after are.

Yea.. me too:(
Like i said, i did this to a brand new 360.. so i did not get to test the difference.
i have been thinking of adding some sort of temp display.. but i dunno. My PC and my car are keeping me plenty busy at the moment.:D
 
Your work looks good man.

I have some questions about the case itself:
How do you eject the disc?
It looks like (at least on the rear) that the connections do not meet the case and line up properly. Is this the case, and it is like that for the front USB connections as well?
Where does the HDD fit?

thanx :)

If you look just below the dvd drive on the fron pannel, to the left there is a little button. Thats to eject.

Just think of it this way.. if you did not have a I/O sheild for the rear connections of your motherboard.. how would that look? It lines up ok, its just they designed it they gave a little room on the bak side for the 120mm fan. the connections go in fine. Like factory

For the hard drive, you have to open the enclosure and take out the drive. It gets installed inside the case under the dvd drive on a little cage like thing.
 
OK I see the HDD hanging at the upper rear of the case. Just could not tell where it was positioned from your pics. That is a nice case, I just dont know if I could over look the way the rear does not meet up properly. Esp with a watercooled setup where the rear fan could be smaller, or slim. I understand it is the rear of the box and not easily noticed but it would bother me. I do like the idea of water cooling the 360 though.

Concerning the DVD drive again, is the manual eject hole easily accessible? Sometimes my drive sticks and needs the paper clip treatment.

Did you have to solder the pump/ lights to the 360s mobo, or were you able to take advantage of the wiring harness the case provides and put it in line with the fans?

Are the interior walls of the case bare metal? In some of the pics it looks like there is some sound deadening material. It also appears that the dvd drive is also isolated pretty well.

Sorry for the questions, but this case does have me curious.
 
Does watercooling (or cooling in general) have any kind of real performance benefits for the 360, other than just reducing heat?
 
Does watercooling (or cooling in general) have any kind of real performance benefits for the 360, other than just reducing heat?

I'm not aware of any way to overclock consoles (in any reliable fashion, at least), so having better cooling would provide no performance benefit.

Just an edumakated guess

Very sexy machine, great job!
 
I installed my 360 in that same lian-li case, very easy to do and looks much nicer in the living room, people are always asking me if it's a computer. I thought about water-cooling as well, but I have no clue how to do it, and could purchase a second xbox 360 instead of getting a water-cooling kit.

As for noise reduction, the DVD drive is the main culprit and we can't really silence that. In any case, 360 did not have any warranty left and i figured i might as well try it out, well worth it!
 
Concerning the DVD drive again, is the manual eject hole easily accessible? Sometimes my drive sticks and needs the paper clip treatment.


Did you have to solder the pump/ lights to the 360s mobo, or were you able to take advantage of the wiring harness the case provides and put it in line with the fans?

Are the interior walls of the case bare metal? In some of the pics it looks like there is some sound deadening material. It also appears that the dvd drive is also isolated pretty well.

Sorry for the questions, but this case does have me curious.

Yes the entire front of the DVD drive is shown... so you can get to the eject hole.

I did solder the lights and pump to the main connector on the board. so its always 100% on. The lights have a switch.
The two 120mm fans run off the factory fan header and is controlled by the 360 to keep the noise down and only kicks up when needed.

You are correct. Around the DVD drive area, it has some foam for sound deamening. The rest is bare metal.

I dont mind the questions. Sorry I did not respond sooner.



Does watercooling (or cooling in general) have any kind of real performance benefits for the 360, other than just reducing heat?

Honestly...No.
Unless it runs better just for the fact that it runs cooler. Other then that no.



Pssst. Get some clamps on that pump and anything else without them.

Belive me, was going to. Till i tried to take them off.... I CANT lol:D
 
I installed my 360 in that same lian-li case, very easy to do and looks much nicer in the living room, people are always asking me if it's a computer. I thought about water-cooling as well, but I have no clue how to do it, and could purchase a second xbox 360 instead of getting a water-cooling kit.

As for noise reduction, the DVD drive is the main culprit and we can't really silence that. In any case, 360 did not have any warranty left and i figured i might as well try it out, well worth it!


I agree, this case is well worth it. It DEF looks better in the living room compared to the factory white case.
 
I must admit, incredible job.
As its a console, useless, but I am very impressed.

Excellent work. Hopefully such a modifcation should last you forever. If not, Microsoft screwed up the basic engineering, not just in the cooling system. Guess you will be the first to know...
 
ebay it, i bet you'd be able to make a very nice profit (assuming you got the x360 post pprice drops)

very very nice work btw....
 
very nice, now all you have to do is buy a 2TB drive and you're all set!
 
I installed my 360 in that same lian-li case, very easy to do and looks much nicer in the living room, people are always asking me if it's a computer. I thought about water-cooling as well, but I have no clue how to do it, and could purchase a second xbox 360 instead of getting a water-cooling kit.

As for noise reduction, the DVD drive is the main culprit and we can't really silence that. In any case, 360 did not have any warranty left and i figured i might as well try it out, well worth it!


Totally did not see this thread as I just started one similar. I found an article that I reference in my thread that talks about wrapping the optical drive with Dynamat which dropped the noise level around 3-4 db. I assume you could do something similar in that case (which I am thinking of trying).

Props to the OP for the install. I do have one question though: Did you ever give thought to trying to install the rad on the already installed 120mm fan and if so why did it not work? That is something I am considering and without having my own right now in front of me I cannot see the tolerances on the board.
 
I don't think it's a useless mod at all. Xbox 360s die quite often and probably due to heat issues. I highly doubt the OP will have this problem.
 
I don't think it's a useless mod at all. Xbox 360s die quite often and probably due to heat issues. I highly doubt the OP will have this problem.

+1 I am actually looking to purchase an RROD to fix as normally the ring is due to problems with the built in fans soder breaking and cracking. The OP will have no issues with that. I am interested to know how much if any quieter it is (as the optical drive seems to be what causes the most noise)
 
Back
Top