Shipping a PC w/ a Tuniq tower

stain.

[H]ard|Gawd
Joined
Sep 17, 2006
Messages
1,045
What's the best way to do it? I thought about that AFTER everything was ordered. :)

it's going from minnesota to texas.
 
Well I usually pack up CPU and HSF separately, but that's my old school thinking (Socket A monstrosities like SLK800). How good/strong is the mounting?
 
Well I usually pack up CPU and HSF separately, but that's my old school thinking (Socket A monstrosities like SLK800). How good/strong is the mounting?

Yes, I couldn't agree more. The best thing to do is take the HSF off. Depending on your GFX card, I'd take that off too (like 8800 GTS/GTX/Ultras, since they are heavy).
 
One of the moutning posts for the tuniq is hard to screw in. I can replace it with nuts and bolts, and just leave the bolts in the mobo when I ship it, that way the only thing they have to do is dab a little thermal paste on it, and bolt it down.

The thumb screws are in there tight.

The GPu is the g92 8800gts 512.

I'm going to insure it for $2k
 
I'm assuming you want to build it, then ship it. The problem is, the Tuniq is really HEAVY. So, go ahead and install the HSF as normal, so you can test the system before you ship it. Once you're ready to ship it, remove the Tuniq. Clean the CPU and HSF base with some 90% isopropyl alcohol and a coffee filter (lint-free cloth). Place a plastic cover on the CPU/Socket and screw down the top bracket as if the HSF was still there. Don't screw it too tightly. This is done to ensure the backplate doesn't fall off during shipping (if you didn't screw the bolts back in). Ship the Tuniq in its box, and the system separately.

I'd also ship that GTS separately, but thats just me. You can buy a plastic bracket that will help hold it down during shipment.
Card Keepers: http://www.performance-pcs.com/cata...th=176&zenid=3bc73852bb58a94aa393da43b2450c96
 
Back
Top