Jakalwarrior
2[H]4U
- Joined
- Aug 6, 2005
- Messages
- 3,189
Ok I have 4 so ill start.
Ancient old packard bell 75mhz computer.
Tried to overclock and melted the sound card somehow?
I was like 12.
Pentium 3 500mhz Compaq
Tried to install some SDRAM in the dark, somehow wedged it in upside down. Made some nice smoke, melted some plastic, burned the gold contacts black.............. Still worked after I straighted out the pins that got bent by the disformed plastic around them. The ram stick with the burn contacts still worked too.
Neo2 Plat 939
Just learned how to read voltages with a multimeter and got a little carried away. "Hmm wonder what this voltage goes too... cool!" "how about this one..." Computer flicked off instantly and never came back on again. Chip and motherboard dead.
ASRock DualSATA II 939
This was a few weeks ago. My heart is still broken
. Was trying to make the system work with 2 gigs of unmatched ram and was swapping ram in and out constantly trying to make the system happy. My power switch happens to be a little button on the end of a long wire that hangs outside my skeletal case. Anyway, the button got lost in some clutter on my desk and my elbow mashed it as I was halfway done removing a piece. Made a little stink and the board is dead. Not sure on the ram, havent toyed with it again yet.
It's funny how the little things kill hardware, then other times you make huge sparks, flames, smoke, and everything is fine. Made lots of sparks vmodding my 9800pro with shaky hands, still runs great, few sparks other times too on mobos etc.. over the years. Im usually not to careful with my own stuff since having a reason to upgrade it usually doesnt bother me too horribly. Of course when im working on other peoples stuff I work as methodically as possible and take 0 chances. I would hate to have to buy somone else a new piece of hardware, much rather spend the money on myself.
Ancient old packard bell 75mhz computer.
Tried to overclock and melted the sound card somehow?
Pentium 3 500mhz Compaq
Tried to install some SDRAM in the dark, somehow wedged it in upside down. Made some nice smoke, melted some plastic, burned the gold contacts black.............. Still worked after I straighted out the pins that got bent by the disformed plastic around them. The ram stick with the burn contacts still worked too.
Neo2 Plat 939
Just learned how to read voltages with a multimeter and got a little carried away. "Hmm wonder what this voltage goes too... cool!" "how about this one..." Computer flicked off instantly and never came back on again. Chip and motherboard dead.
ASRock DualSATA II 939
This was a few weeks ago. My heart is still broken
It's funny how the little things kill hardware, then other times you make huge sparks, flames, smoke, and everything is fine. Made lots of sparks vmodding my 9800pro with shaky hands, still runs great, few sparks other times too on mobos etc.. over the years. Im usually not to careful with my own stuff since having a reason to upgrade it usually doesnt bother me too horribly. Of course when im working on other peoples stuff I work as methodically as possible and take 0 chances. I would hate to have to buy somone else a new piece of hardware, much rather spend the money on myself.